Coal production
0reported short tons
ACTIVE / CONTROLLER PORTFOLIO
Membership and operating status are from the latest MSHA Mines snapshot. Open a mine for its ownership history.
MINE PORTFOLIO
2025-01-01 – 2026-10-18. Active records; production reporting is not required.
Material, method and type filters apply to this table. The portfolio’s status applies to the entire page. GEM fields describe their own release, not the selected MSHA year.
| Mine | Location / type | Coal · short tons | Hours worked | Violations | Accident records | On-site inspection hours |
|---|---|---|---|---|---|---|
| Chino Mines Co Mine2900708 · Active6/8 quarters reported | Grant, NMSurface · MSHA: Copper Ore NEC | 0 | 2,611,400 | 123 | 31 | 525.0 |
| Climax Mine0502256 · Active6/8 quarters reported | Lake, COSurface · MSHA: Molybdenum Ore | 0 | 1,592,877 | 119 | 18 | 577.3 |
| Cyprus Tohono Corporation0202579 · Active6/8 quarters reported | Pinal, AZSurface · MSHA: Copper Ore NEC | 0 | 57,727 | 7 | 0 | 28.5 |
| Freeport-McMoRan Bagdad Inc0200137 · Active6/8 quarters reported | Yavapai, AZSurface · MSHA: Copper Ore NEC | 0 | 3,577,050 | 102 | 47 | 1,030.8 |
| Freeport McMoRan Miami Inc0200112 · Active6/8 quarters reported | Gila, AZSurface · MSHA: Copper Ore NEC | 0 | 373,778 | 11 | 9 | 123.5 |
| Freeport-McMoRan Morenci Inc.0200024 · Active6/8 quarters reported | Greenlee, AZSurface · MSHA: Copper Ore NEC | 0 | 12,609,005 | 597 | 233 | 3,030.0 |
| Freeport-McMoRan Safford Inc0203131 · Active6/8 quarters reported | Graham, AZSurface · MSHA: Copper Ore NEC | 0 | 4,889,229 | 151 | 57 | 985.8 |
| Freeport-McMoRan Sierrita Ops.0200144 · Active6/8 quarters reported | Pima, AZSurface · MSHA: Copper Ore NEC | 0 | 4,067,210 | 155 | 60 | 707.0 |
| HENDERSON OPERATIONS0500790 · Active6/8 quarters reported | Clear Creek, COUnderground · MSHA: Molybdenum Ore | 0 | 1,242,916 | 252 | 12 | 1,555.0 |
| TYRONE MINE2900159 · Active6/8 quarters reported | Grant, NMSurface · MSHA: Copper Ore NEC | 0 | 663,994 | 31 | 3 | 178.5 |
Production and hours sum available quarterly reports. — means unavailable; zero safety records means none in the selected imported period. Ownership reflects the current MSHA record.
LOCATION
10 of 10 mines with usable MSHA coordinates. Select a marker to open a mine.
2025 Q1 – 2026 Q4
Database snapshot · 2026-10-18. All 10 mines listed under this controller were checked; 10 have reports in the available quarters. Totals use current ownership.
reported short tons
reported employee hours
production ÷ hours worked
Missing values appear as —. Totals use available reports. Tons per hour requires production and hours for the same quarters and a nonzero hours total. * Striped bars mark partial mine coverage or an incomplete quarter. See the table for coverage.
| Quarter | Coal (short tons) | Hours worked | Tons / hour | Avg. employees | Coverage |
|---|---|---|---|---|---|
| 2025 Q1 | 0 | 5,349,193 | 0.00 | 10,415 | 10/10 mines reporting |
| 2025 Q2 | 0 | 5,499,081 | 0.00 | 10,566 | 10/10 mines reporting |
| 2025 Q3 | 0 | 5,291,684 | 0.00 | 10,430 | 10/10 mines reporting |
| 2025 Q4 | 0 | 5,152,226 | 0.00 | 10,611 | 10/10 mines reporting |
| 2026 Q1 | 0 | 5,114,014 | 0.00 | 10,164 | 10/10 mines reporting |
| 2026 Q2 | 0 | 5,278,988 | 0.00 | 10,133 | 10/10 mines reporting |
| 2026 Q3 | — | — | — | — | No report |
| 2026 Q4 | — | — | — | — | No report |
2025-01-01 – 2026-10-18
235 significant & substantial (S&S)
1 records classified as fatality
1,447 of 1,548 violations with amounts
177 inspections · 177 with hours
Counts are published records, including contractor records. * The quarter was incomplete at the snapshot date; recent counts may rise as reports arrive. — means no reported amount or hours. Portfolio totals use current membership.
| Quarter | Violations | S&S | Proposed USD | Accident records | Fatality records | Inspections | On-site hours |
|---|---|---|---|---|---|---|---|
| 2025-Q1 | 266 | 30 | 205,905.00 | 69 | 0 | 22 | 1,474.8 |
| 2025-Q2 | 317 | 71 | 482,608.00 | 65 | 0 | 31 | 1,464.8 |
| 2025-Q3 | 73 | 10 | 60,934.00 | 78 | 0 | 22 | 527.3 |
| 2025-Q4 | 89 | 13 | 74,559.00 | 59 | 0 | 16 | 582.5 |
| 2026-Q1 | 349 | 64 | 413,336.00 | 61 | 0 | 22 | 1,794.5 |
| 2026-Q2 | 182 | 20 | 95,140.00 | 60 | 0 | 29 | 1,237.5 |
| 2026-Q3 | 257 | 26 | 135,535.00 | 78 | 1 | 32 | 1,619.8 |
| 2026-Q4 * | 15 | 1 | — | 0 | 0 | 3 | 40.3 |
All violations issued in the selected period. Counts combine subsections.
DISORDERS (PHYSICAL AGENTS) · OCCUPATNAL ILLNESS NOT DEG 1-6
Mine Ops Employee experienced heat dehydration/heath exhaustion.
HANDLING OF MATERIALS · DAYS AWAY FROM WORK ONLY
Mechanic was inspecting a bolter to replace the striker bar. The extractor and striker bar were resting on the rails when the mechanic placed their left hand on the extractor and right hand on the striker bar it rolled forward and off of the bolter resulting in a laceration and a tufts fracture to the distal phalanx on right ring finger.
Regular Safety and Health Inspection · 227.8 on-site hours
HANDLING OF MATERIALS · NO DYS AWY FRM WRK,NO RSTR ACT
The driver grabbed the stinger and as they moved it, right ring finger became pinched between the stinger handle and the guard rail of the gangway basket.
POWERED HAULAGE · DAYS AWAY FROM WORK ONLY
Haul Truck operator hit an unknown bump, a few minutes after began to feel pain in EE's back.
POWERED HAULAGE · DAYS RESTRICTED ACTIVITY ONLY
Rubber tire driver hit a few potholes and felt a slight pain on EE's chest and low back. When the driver stopped to check equipment, EE felt dizzy and could not stand.
Verbal Hazard Complaint Inspections · 6.3 on-site hours
56.14101(a)(3) · $165.00 proposed
HANDTOOLS (NONPOWERED) · NO DYS AWY FRM WRK,NO RSTR ACT
Employee cut hand with razor knife
HANDLING OF MATERIALS · DAYS RESTRICTED ACTIVITY ONLY
Employee misplaced hand and smashed finger
HANDLING OF MATERIALS · NO DYS AWY FRM WRK,NO RSTR ACT
Employee were working on 901 feeder when separating the unit with a ram the unit roller causing the ram to pop as the employee was walking away something hit EE's PARP as EE turned EE's back causing the PARP to scratch EE's forehead
HANDLING OF MATERIALS · NO DYS AWY FRM WRK,NO RSTR ACT
EE was ball charging in the Mill. The bin became low. They used a ball to throw up into the bin to attempt to get more balls to come down. EE was wearing impact gloves. The balls started to come down and pinched their left pinky finger, causing a fracture to the distal tuft (tip of finger). Was released back to work wrapped with coban.
POWERED HAULAGE · DAYS RESTRICTED ACTIVITY ONLY
The employee was in the cab of the radial stacker when the 2450-002 luffing system base failed at end of shift causing the stacker cab to drop to the right side. The operator in the cab, experienced some discomfort to the left leg after the luffing system failed.
HANDLING OF MATERIALS · DAYS RESTRICTED ACTIVITY ONLY
Employee was lifting a return idler to carry down the tunnel when they felt a pain in lower left abdomen. Employee was taken to the ER, diagnosed with muscle strain and referred to PCP. PCP placed on restrictions. CURRENTLY ONGOING.
SLIP OR FALL OF PERSON · DAYS RESTRICTED ACTIVITY ONLY
Employee twisted knee at sump pump
Compliance Follow-up Inspection · 0.0 on-site hours
HANDLING OF MATERIALS · NO DYS AWY FRM WRK,NO RSTR ACT
Employee was connecting a flange to a pipe and was struck in the mouth by one of the bands.
OTHER · DAYS AWAY FROM WORK ONLY
Employee had returned from taking samples, entered information, stood up from the chair and experienced a sharp pain run from lower left leg to lower hip area. Employee was evaluated by an ERT member then taken to the ER for evaluation. Employee was taken off work until evaluated by PCP.
OTHER · NO DYS AWY FRM WRK,NO RSTR ACT
Operator was running the A-crane at Central Tankhouse. While hooking up the mist ball basket, a small piece of debris fell from the inside of their full-face Respirator into their eye causing irritation. They went to the clinic for treatment where a small scratch was found and prescription eyedrops were administered.
HANDLING OF MATERIALS · NO DYS AWY FRM WRK,NO RSTR ACT
Employee was bolting up a cover for the NGR behind the transformer. It started to slide down. EE tried to stop it and EE's had was struck by the corner on the Handle.
HANDLING OF MATERIALS · DAYS RESTRICTED ACTIVITY ONLY
RAM Belt Team was performing work on the 8D feeder belt. While maneuvering the I-beam on the deck, two RAM employees - one pulling and one pushing - attempted to slide the I-beam into position. During this process, one team member's right pinky finger was pinched between the I-beam and the structure.
HANDLING OF MATERIALS · NO DYS AWY FRM WRK,NO RSTR ACT
While attempting to place a heavy object in the bed of a truck, the load shifted and pinched employees finger between the bed and the item itself. The injury sustained caused by the weight of the item was a pinch. The pinch caused a laceration requiring four stitches
Verbal Hazard Complaint Inspections · 2.0 on-site hours
Verbal Hazard Complaint Inspections · 1.8 on-site hours
Compliance Follow-up Inspection · 1.3 on-site hours
MSHA Violations (issue date), Accidents (accident date), and Inspections (begin date). Snapshot 2026-10-18.
Counts describe published rows, including contractor records; accident records are not distinct incidents or numbers of people injured.
Zero means no matching records in the imported sources, not proof of no events. Historical coverage differs by source; absence before a source begins reporting is not a zero incident rate. Invalid or absent dates and records after the snapshot are excluded.
S&S means SIG_SUB=Y. Fatality records use DEGREE_INJURY_CD=01. Proposed penalties are not final assessed or paid amounts; missing dollar values are omitted.
Inspection hours are SUM_TOTAL_ON_SITE_HOURS attributed to the inspection start date, without supervisor/trainee hours. Missing hours are omitted; a started inspection may still be open.
Portfolio totals use current mine membership, including events before the current owner or operator's tenure.
CFR headings link to the current Title 30 index; they are not historical legal determinations.
SELECTED PORTFOLIO
Relationships reflect the selected mine status and current MSHA controller/operator fields.