Coal production
0reported short tons
ACTIVE / CONTROLLER PORTFOLIO
Membership and operating status are from the latest MSHA Mines snapshot. Open a mine for its ownership history.
MINE PORTFOLIO
2025-01-01 – 2026-10-18. Active records; production reporting is not required.
Material, method and type filters apply to this table. The portfolio’s status applies to the entire page. GEM fields describe their own release, not the selected MSHA year.
| Mine | Location / type | Coal · short tons | Hours worked | Violations | Accident records | On-site inspection hours |
|---|---|---|---|---|---|---|
| Chino Mines Co Mine2900708 · Active6/8 quarters reported | Grant, NMSurface · MSHA: Copper Ore NEC | 0 | 2,611,400 | 123 | 31 | 525.0 |
| Climax Mine0502256 · Active6/8 quarters reported | Lake, COSurface · MSHA: Molybdenum Ore | 0 | 1,592,877 | 119 | 18 | 577.3 |
| Cyprus Tohono Corporation0202579 · Active6/8 quarters reported | Pinal, AZSurface · MSHA: Copper Ore NEC | 0 | 57,727 | 7 | 0 | 28.5 |
| Freeport-McMoRan Bagdad Inc0200137 · Active6/8 quarters reported | Yavapai, AZSurface · MSHA: Copper Ore NEC | 0 | 3,577,050 | 102 | 47 | 1,030.8 |
| Freeport McMoRan Miami Inc0200112 · Active6/8 quarters reported | Gila, AZSurface · MSHA: Copper Ore NEC | 0 | 373,778 | 11 | 9 | 123.5 |
| Freeport-McMoRan Morenci Inc.0200024 · Active6/8 quarters reported | Greenlee, AZSurface · MSHA: Copper Ore NEC | 0 | 12,609,005 | 597 | 233 | 3,030.0 |
| Freeport-McMoRan Safford Inc0203131 · Active6/8 quarters reported | Graham, AZSurface · MSHA: Copper Ore NEC | 0 | 4,889,229 | 151 | 57 | 985.8 |
| Freeport-McMoRan Sierrita Ops.0200144 · Active6/8 quarters reported | Pima, AZSurface · MSHA: Copper Ore NEC | 0 | 4,067,210 | 155 | 60 | 707.0 |
| HENDERSON OPERATIONS0500790 · Active6/8 quarters reported | Clear Creek, COUnderground · MSHA: Molybdenum Ore | 0 | 1,242,916 | 252 | 12 | 1,555.0 |
| TYRONE MINE2900159 · Active6/8 quarters reported | Grant, NMSurface · MSHA: Copper Ore NEC | 0 | 663,994 | 31 | 3 | 178.5 |
Production and hours sum available quarterly reports. — means unavailable; zero safety records means none in the selected imported period. Ownership reflects the current MSHA record.
LOCATION
10 of 10 mines with usable MSHA coordinates. Select a marker to open a mine.
2025 Q1 – 2026 Q4
Database snapshot · 2026-10-18. All 10 mines listed under this controller were checked; 10 have reports in the available quarters. Totals use current ownership.
reported short tons
reported employee hours
production ÷ hours worked
Missing values appear as —. Totals use available reports. Tons per hour requires production and hours for the same quarters and a nonzero hours total. * Striped bars mark partial mine coverage or an incomplete quarter. See the table for coverage.
| Quarter | Coal (short tons) | Hours worked | Tons / hour | Avg. employees | Coverage |
|---|---|---|---|---|---|
| 2025 Q1 | 0 | 5,349,193 | 0.00 | 10,415 | 10/10 mines reporting |
| 2025 Q2 | 0 | 5,499,081 | 0.00 | 10,566 | 10/10 mines reporting |
| 2025 Q3 | 0 | 5,291,684 | 0.00 | 10,430 | 10/10 mines reporting |
| 2025 Q4 | 0 | 5,152,226 | 0.00 | 10,611 | 10/10 mines reporting |
| 2026 Q1 | 0 | 5,114,014 | 0.00 | 10,164 | 10/10 mines reporting |
| 2026 Q2 | 0 | 5,278,988 | 0.00 | 10,133 | 10/10 mines reporting |
| 2026 Q3 | — | — | — | — | No report |
| 2026 Q4 | — | — | — | — | No report |
2025-01-01 – 2026-10-18
235 significant & substantial (S&S)
1 records classified as fatality
1,447 of 1,548 violations with amounts
177 inspections · 177 with hours
Counts are published records, including contractor records. * The quarter was incomplete at the snapshot date; recent counts may rise as reports arrive. — means no reported amount or hours. Portfolio totals use current membership.
| Quarter | Violations | S&S | Proposed USD | Accident records | Fatality records | Inspections | On-site hours |
|---|---|---|---|---|---|---|---|
| 2025-Q1 | 266 | 30 | 205,905.00 | 69 | 0 | 22 | 1,474.8 |
| 2025-Q2 | 317 | 71 | 482,608.00 | 65 | 0 | 31 | 1,464.8 |
| 2025-Q3 | 73 | 10 | 60,934.00 | 78 | 0 | 22 | 527.3 |
| 2025-Q4 | 89 | 13 | 74,559.00 | 59 | 0 | 16 | 582.5 |
| 2026-Q1 | 349 | 64 | 413,336.00 | 61 | 0 | 22 | 1,794.5 |
| 2026-Q2 | 182 | 20 | 95,140.00 | 60 | 0 | 29 | 1,237.5 |
| 2026-Q3 | 257 | 26 | 135,535.00 | 78 | 1 | 32 | 1,619.8 |
| 2026-Q4 * | 15 | 1 | — | 0 | 0 | 3 | 40.3 |
All violations issued in the selected period. Counts combine subsections.
SLIP OR FALL OF PERSON · DAYS RESTRICTED ACTIVITY ONLY
While disembarking a man van, a dayshift haul truck operator stepped into a low, rocky spot and rolled their ankle. The operator stated they felt immediate pain and sat down and asked for help.
MACHINERY · PERM TOT OR PERM PRTL DISABLTY
Employee was adjusting lifting shackle and overhead crane hook during lifting operations. The employee's right index finger was pinched between lifting shackle and overhead crane hook. The employee suffered partial traumatic transphalangeal amputation of right index finger with nailbed involvement.
SLIP OR FALL OF PERSON · DAYS AWAY FROM WORK ONLY
Operator slipped dismounting a motor grader, lost grip on the ladder and fell on the grader blade.
Compliance Follow-up Inspection · 12.0 on-site hours
OTHER · DAYS RESTRICTED ACTIVITY ONLY
Contract employee was wearing rubber boots to work in a wet/muddy area for clean-up. They had some of the wet material go over the top of boots causing it to irritate the middle of the calves on both legs where the boots touched the skin. This rubbed the skin causing a burn in a circumference pattern around both legs.
HANDTOOLS (NONPOWERED) · DAYS AWAY FROM WORK ONLY
While installing banjo bracket and arm on the shovel sticks, using a come along, the come along chain failed and the bracket and arm contacted the employee's right wrist area. EE was taken to the ER, diagnosed with a fracture and taken off work. CURRENTLY ONGOING
Verbal Hazard Complaint Inspections · 2.3 on-site hours
POWERED HAULAGE · DAYS RESTRICTED ACTIVITY ONLY
Employee was rough loaded in haul truck
FALLING/SLIDING/ROLLING MATERIALS · DAYS RESTRICTED ACTIVITY ONLY
Mill Maintenance Employee struck by chute liner at GL 3/4/5 chute.
HANDTOOLS (NONPOWERED) · NO DYS AWY FRM WRK,NO RSTR ACT
A mechanic was working on a mast raise cylinder. Attempting to loosen a flange bolt with a wrench and it would not loosen. The mechanic then grabbed a 2lb hammer and struck the wrench several times. On the last strike they missed the wrench and struck their left hand in between the finger and the thumb
HANDLING OF MATERIALS · DYS AWY FRM WRK & RESTRCTD ACT
Employee was hit by 25lb bucket - became reportable 10/20/2025
MACHINERY · DAYS RESTRICTED ACTIVITY ONLY
As employee was making their rounds in the grinding tunnel, a grinding ball rolled down the tunnel, striking them in the left calf. EE was taken to the ER, diagnosed with a contusion and placed on restricted duty. CURRENTLY ONGOING.
HANDLING OF MATERIALS · DAYS RESTRICTED ACTIVITY ONLY
Mill Maint Employee's hand pinned by concave liner at primary crusher.
HANDLING OF MATERIALS · DAYS RESTRICTED ACTIVITY ONLY
Mill Maintenance Employee sustained crush injury during maintenance activity on the XCC 2 Belt.
STRIKING OR BUMPING · DAYS RESTRICTED ACTIVITY ONLY
Claims that EE hit EE's right elbow on the rear corner of EE's truck and then felt a sharp pain in EE's right shoulder while hitting the side of EE's trailer with EE's rubber mallet. Next morning EE could not move EE's right arm without severe pain. Sent to Concentra and diagnosed with a shoulder strain and contusion to elbow and placed on modified duty.
Verbal Hazard Complaint Inspections · 4.8 on-site hours
POWERED HAULAGE · DYS AWY FRM WRK & RESTRCTD ACT
Employee was rough loaded in haul truck - became reportable 10/16/2025
SLIP OR FALL OF PERSON · DYS AWY FRM WRK & RESTRCTD ACT
Employee was walking down staircase when EE stepped on second to the last step, the stair broke resulting in EE's left foot going through the step and hurting EE's ankle. Employee seen and released to full work duties. Employee had follow-up and seen 10/16/2025 and went on restricted duty.
HANDTOOLS (NONPOWERED) · NO DYS AWY FRM WRK,NO RSTR ACT
Employee cut finger with knife - (website was down to report)
SLIP OR FALL OF PERSON · DAYS AWAY FROM WORK ONLY
employee entered thru a doorway into an office area, unaware of a step just inside the door. They tripped/fell on the stair resulting in a sprained ankle.
SLIP OR FALL OF PERSON · DAYS AWAY FROM WORK ONLY
While exiting light vehicle on driver's side, employee stepped onto pointed edge rock, right ankle twisted resulting in subsequent fall to ground. Injury sustained was right ankle avulsion fracture distal fibula
HANDLING OF MATERIALS · DAYS RESTRICTED ACTIVITY ONLY
Employee injured knee going up stairs
HANDLING OF MATERIALS · DAYS RESTRICTED ACTIVITY ONLY
when entering the lube room a 1" shackle fell and stuck EE on top of right foot behind steel toe protection. EE does recall where it fell from when EE entered the lube room.
OCCUPATIONAL SKIN DISEASES · OCCUPATNAL ILLNESS NOT DEG 1-6
At 4 am a haul truck operator began to feel itchy. EE went to the restroom and discovered red bumps (rash) on EE's body. EE notified supervision.
HANDLING OF MATERIALS · NO DYS AWY FRM WRK,NO RSTR ACT
Employee was taking apart a 3-inch hose and the camlock struck EE in the lower lip, causing a laceration.
MSHA Violations (issue date), Accidents (accident date), and Inspections (begin date). Snapshot 2026-10-18.
Counts describe published rows, including contractor records; accident records are not distinct incidents or numbers of people injured.
Zero means no matching records in the imported sources, not proof of no events. Historical coverage differs by source; absence before a source begins reporting is not a zero incident rate. Invalid or absent dates and records after the snapshot are excluded.
S&S means SIG_SUB=Y. Fatality records use DEGREE_INJURY_CD=01. Proposed penalties are not final assessed or paid amounts; missing dollar values are omitted.
Inspection hours are SUM_TOTAL_ON_SITE_HOURS attributed to the inspection start date, without supervisor/trainee hours. Missing hours are omitted; a started inspection may still be open.
Portfolio totals use current mine membership, including events before the current owner or operator's tenure.
CFR headings link to the current Title 30 index; they are not historical legal determinations.
SELECTED PORTFOLIO
Relationships reflect the selected mine status and current MSHA controller/operator fields.