ALL STATUSES / OPERATOR PORTFOLIO

Hecla Limited

Membership and operating status are from the latest MSHA Mines snapshot. Open a mine for its ownership history.

MSHA OPERATOR IDL00049

MINE PORTFOLIO

18 of 18 mines and facilities

2025-01-01 – 2026-10-18. All statuses records; production reporting is not required.

MineLocation / typeCoal · short tonsHours workedViolationsAccident recordsOn-site inspection hours
Lucky Friday1000088 · Active6/8 quarters reportedShoshone, IDUnderground · MSHA: Silver Ore01,282,5246527666.8
Apex Mine Underground4201124 · AbandonedWashington, UTUnderground · MSHA: Misc. Metal Ore NEC——00—
Apex Unit4201917 · AbandonedWashington, UTFacility · MSHA: Cobalt Ore——00—
Dayrock1000087 · AbandonedShoshone, IDUnderground · MSHA: Silver Ore——00—
Escalante Mine4201613 · AbandonedIron, UTSurface · MSHA: Silver Ore——00—
Florence Queen2401710 · AbandonedCascade, MTUnderground · MSHA: Silver Ore——00—
GROUSE CREEK UNIT1001552 · AbandonedCuster, IDSurface · MSHA: Gold Ore——00—
Grouse Creek Venture1001893 · AbandonedCuster, IDUnderground · MSHA: Gold Ore——00—
Hughesville Joint Venture2401726 · AbandonedMeagher, MTUnderground · MSHA: Gold Ore——00—
Johnny M Mine2900560 · AbandonedMckinley, NMUnderground · MSHA: Uranium Ore——00—
Lakeshore Mill0201137 · AbandonedPinal, AZFacility · MSHA: Copper Ore NEC——00—
Quilp Decline4503216 · AbandonedFerry, WAUnderground · MSHA: Gold Ore——00—
REPUBLIC UNIT4500365 · AbandonedFerry, WAUnderground · MSHA: Gold Ore——00—
Silver Dollar Mine1001247 · AbandonedShoshone, IDUnderground · MSHA: Lead-Zinc Ore——00—
Snowstorm #31001835 · AbandonedShoshone, IDUnderground · MSHA: Silver Ore——00—
Snow Storm Project1001591 · AbandonedShoshone, IDUnderground · MSHA: Silver Ore——00—
Tamarack1000180 · AbandonedShoshone, IDUnderground · MSHA: Lead-Zinc Ore——00—
Yellow Pine Mine1001849 · AbandonedValley, IDSurface · MSHA: Gold Ore——00—

LOCATION

Portfolio map

1 of 18 mines with usable MSHA coordinates. Select a marker to open a mine.

Mine coordinates

2025-01-01 – 2026-10-18Applies to production, safety and portfolio metrics. Silica samples have separate filters.

Violations

65

8 significant & substantial (S&S)

  1. 2025 Q17
  2. 2025 Q210
  3. 2025 Q32
  4. 2025 Q421
  5. 2026 Q114
  6. 2026 Q26
  7. 2026 Q35
  8. 2026 Q4 *0

Accident records

27

0 records classified as fatality

  1. 2025 Q12
  2. 2025 Q27
  3. 2025 Q34
  4. 2025 Q44
  5. 2026 Q14
  6. 2026 Q21
  7. 2026 Q35
  8. 2026 Q4 *0

Proposed penalties · USD

33,090.00

63 of 65 violations with amounts

  1. 2025 Q111,475
  2. 2025 Q25,212
  3. 2025 Q3549
  4. 2025 Q46,561
  5. 2026 Q14,736
  6. 2026 Q23,600
  7. 2026 Q3957
  8. 2026 Q4 *—

On-site inspection hours

666.75

20 inspections · 20 with hours

  1. 2025 Q171.75
  2. 2025 Q2118.25
  3. 2025 Q369.00
  4. 2025 Q4118.25
  5. 2026 Q1104.25
  6. 2026 Q290.50
  7. 2026 Q394.75
  8. 2026 Q4 *—
Quarterly safety data
QuarterViolationsS&SProposed USDAccident recordsFatality recordsInspectionsOn-site hours
2025-Q17111,475.0020271.8
2025-Q21025,212.00704118.3
2025-Q320549.0040269.0
2025-Q42116,561.00402118.3
2026-Q11414,736.00403104.3
2026-Q2623,600.0010490.5
2026-Q351957.0050394.8
2026-Q4 *00—000—

Most cited CFR sections

All violations issued in the selected period. Counts combine subsections.

Safety activity

  1. violation5053448
    Lucky Friday · 1000088

    57.4104(a) · $151.00 proposed

  2. violation5053447
    Lucky Friday · 1000088

    57.20011 · $398.00 proposed

  3. accident220252040016
    Lucky Friday · 1000088

    HOISTING · ACCIDENT ONLY

    Accident narrative

    Silver Shaft hoist operator heard noise coming from the drum while the hoist was in operation. The hoist operator called maintenance to come inspect the hoist and they found that a saddle and both nuts on a Crosby clamp had come loose. The clamp that came loose was one of 4 extra clamps that were added to hold the tail of the rope on the inside of the drum.

  4. inspectionF028C1F
    Lucky Friday · 1000088

    Regular Safety and Health Inspection · 67.5 on-site hours

  5. inspectionF017DCE
    Lucky Friday · 1000088

    Impoundment Spot Inspection · 1.5 on-site hours

  6. accident220251890007
    Lucky Friday · 1000088

    MACHINERY · NO DYS AWY FRM WRK,NO RSTR ACT

    Accident narrative

    Employee was trimming the front wallplate with a battery powered saw and while making a cut, the saw slipped causing a laceration to employee's thigh. Employee received 8 sutures.

  7. accident220251780014
    Lucky Friday · 1000088

    HOISTING · ACCIDENT ONLY

    Accident narrative

    Silver Shaft hoist was down due to east pinion brake trip fault that would not reset.

  8. violation9829933
    Lucky Friday · 1000088

    50.10(d) · $151.00 proposed

  9. inspection6948867
    Lucky Friday · 1000088

    Spot Inspection · 3.8 on-site hours

  10. accident220251270020
    Lucky Friday · 1000088

    HOISTING · ACCIDENT ONLY

    Accident narrative

    The hoist tripped due to the gap on the right brake stand-2 upper caliper was detected on the hoist control system to be outside of tolerance at 2mm. The gap was checked and adjusted to 0mm at which time the hoist was reset and back operational. The Silver Shaft Hoist (primary) and 2 Shaft hoist (secondary) were operational throughout.

  11. violation5052717
    Lucky Friday · 1000088

    48.7(a) · S&S · $2,187.00 proposed

  12. violation5052714
    Lucky Friday · 1000088

    57.9101 · S&S · $1,968.00 proposed

  13. violation5052716
    Lucky Friday · 1000088

    57.3360 · $151.00 proposed

  14. accident220251150039
    Lucky Friday · 1000088

    HOISTING · ACCIDENT ONLY

    Accident narrative

    Lost incoming power to the mine site for a short period of time due to a weather event which caused the hoists to trip. The hoists and compressors needed to be reset and started back up. Hoists were back operational by 7:04 PM.

  15. accident220251900020
    Lucky Friday · 1000088

    POWERED HAULAGE · DAYS AWAY FROM WORK ONLY

    Accident narrative

    Employee was transporting a tote of diesel fuel and got a flat tire on the 1-yard forklift they was using to transport the fuel. Employee was pulling into a cutout to get it out of the roadway and as they were pulling in they hit a bump and reached their arm out toward the rib and strained left shoulder. Employee ended up having to get surgery for a rotator cuff injury.

  16. violation5053409
    Lucky Friday · 1000088

    57.12032 · $151.00 proposed

  17. violation9829926
    Lucky Friday · 1000088

    57.12041 · $151.00 proposed

  18. violation5053408
    Lucky Friday · 1000088

    57.16007(a) · $151.00 proposed

  19. violation5053407
    Lucky Friday · 1000088

    57.4104(a) · $151.00 proposed

  20. violation9829925
    Lucky Friday · 1000088

    57.4203 · $151.00 proposed

  21. accident220251060015
    Lucky Friday · 1000088

    FIRE · ACCIDENT ONLY

    Accident narrative

    Miner was mucking into a muck bay with a 2-Yard LHD. They had a full bucket and when attempting to dump it they got on uneven ground and as they raised the bucket the loader tipped over onto the right side. After it tipped, oil and fuel began to leak onto hot components of the exhaust and possibly the turbo which caused the fluids to ignite, resulting in the loader catching fire.

  22. accident220251060012
    Lucky Friday · 1000088

    HANDLING OF MATERIALS · NO DYS AWY FRM WRK,NO RSTR ACT

    Accident narrative

    EE was moving a jumbo drill steel and pinched left ring finger between the steel and the metal box on the loader fender.

  23. inspection6948546
    Lucky Friday · 1000088

    Non-Injury Accident Investigation · 44.5 on-site hours

  24. inspectionF017DBB
    Lucky Friday · 1000088

    Impoundment Spot Inspection · 3.3 on-site hours

  25. inspection6948547
    Lucky Friday · 1000088

    Regular Safety and Health Inspection · 66.8 on-site hours

Safety sources and definitions

MSHA Violations (issue date), Accidents (accident date), and Inspections (begin date). Snapshot 2026-10-18.

Counts describe published rows, including contractor records; accident records are not distinct incidents or numbers of people injured.

Zero means no matching records in the imported sources, not proof of no events. Historical coverage differs by source; absence before a source begins reporting is not a zero incident rate. Invalid or absent dates and records after the snapshot are excluded.

S&S means SIG_SUB=Y. Fatality records use DEGREE_INJURY_CD=01. Proposed penalties are not final assessed or paid amounts; missing dollar values are omitted.

Inspection hours are SUM_TOTAL_ON_SITE_HOURS attributed to the inspection start date, without supervisor/trainee hours. Missing hours are omitted; a started inspection may still be open.

Portfolio totals use current mine membership, including events before the current owner or operator's tenure.

CFR headings link to the current Title 30 index; they are not historical legal determinations.

SELECTED PORTFOLIO

1 linked controller.

Relationships reflect the selected mine status and current MSHA controller/operator fields.