← Hecla Limited

Hecla Limited safety activity

MSHA violations, accident reports and inspections across the current mine portfolio.

2025-01-01 – 2026-10-31Database snapshot · 2026-10-31

Safety activity

  1. Combustible waste.

    violationRecord 5053448
    Lucky Friday · 1000088

    30 CFR 57.4104(a) · $151.00 proposed penalty

  2. Barricades and warning signs.

    violationRecord 5053447
    Lucky Friday · 1000088

    30 CFR 57.20011 · $398.00 proposed penalty

  3. Hoisting

    accidentRecord 220252040016
    Lucky Friday · 1000088

    Accident only

    Accident narrative

    Silver Shaft hoist operator heard noise coming from the drum while the hoist was in operation. The hoist operator called maintenance to come inspect the hoist and they found that a saddle and both nuts on a Crosby clamp had come loose. The clamp that came loose was one of 4 extra clamps that were added to hold the tail of the rope on the inside of the drum.

  4. Regular Safety and Health Inspection

    inspectionRecord F028C1F
    Lucky Friday · 1000088

    67.5 on-site hours reported

  5. Impoundment Spot Inspection

    inspectionRecord F017DCE
    Lucky Friday · 1000088

    1.5 on-site hours reported

  6. Machinery

    accidentRecord 220251890007
    Lucky Friday · 1000088

    No dys awy frm wrk,no rstr act

    Accident narrative

    Employee was trimming the front wallplate with a battery powered saw and while making a cut, the saw slipped causing a laceration to employee's thigh. Employee received 8 sutures.

  7. Hoisting

    accidentRecord 220251780014
    Lucky Friday · 1000088

    Accident only

    Accident narrative

    Silver Shaft hoist was down due to east pinion brake trip fault that would not reset.

  8. Immediate notification.

    violationRecord 9829933
    Lucky Friday · 1000088

    30 CFR 50.10(d) · $151.00 proposed penalty

  9. Spot Inspection

    inspectionRecord 6948867
    Lucky Friday · 1000088

    3.8 on-site hours reported

  10. Hoisting

    accidentRecord 220251270020
    Lucky Friday · 1000088

    Accident only

    Accident narrative

    The hoist tripped due to the gap on the right brake stand-2 upper caliper was detected on the hoist control system to be outside of tolerance at 2mm. The gap was checked and adjusted to 0mm at which time the hoist was reset and back operational. The Silver Shaft Hoist (primary) and 2 Shaft hoist (secondary) were operational throughout.

  11. Training of miners assigned to a task in which they have had no previous experience; minimum courses of instruction.

    violationRecord 5052717
    Lucky Friday · 1000088

    30 CFR 48.7(a) · Significant and substantial (S&S) · $2,187.00 proposed penalty

  12. Operating speeds and control of equipment.

    violationRecord 5052714
    Lucky Friday · 1000088

    30 CFR 57.9101 · Significant and substantial (S&S) · $1,968.00 proposed penalty

  13. Ground support use.

    violationRecord 5052716
    Lucky Friday · 1000088

    30 CFR 57.3360 · $151.00 proposed penalty

  14. Hoisting

    accidentRecord 220251150039
    Lucky Friday · 1000088

    Accident only

    Accident narrative

    Lost incoming power to the mine site for a short period of time due to a weather event which caused the hoists to trip. The hoists and compressors needed to be reset and started back up. Hoists were back operational by 7:04 PM.

  15. Powered haulage

    accidentRecord 220251900020
    Lucky Friday · 1000088

    Days away from work only

    Accident narrative

    Employee was transporting a tote of diesel fuel and got a flat tire on the 1-yard forklift they was using to transport the fuel. Employee was pulling into a cutout to get it out of the roadway and as they were pulling in they hit a bump and reached their arm out toward the rib and strained left shoulder. Employee ended up having to get surgery for a rotator cuff injury.

  16. Inspection and cover plates.

    violationRecord 5053409
    Lucky Friday · 1000088

    30 CFR 57.12032 · $151.00 proposed penalty

  17. Design of switches and starting boxes.

    violationRecord 9829926
    Lucky Friday · 1000088

    30 CFR 57.12041 · $151.00 proposed penalty

  18. Taglines, hitches, and slings.

    violationRecord 5053408
    Lucky Friday · 1000088

    30 CFR 57.16007(a) · $151.00 proposed penalty

  19. Combustible waste.

    violationRecord 5053407
    Lucky Friday · 1000088

    30 CFR 57.4104(a) · $151.00 proposed penalty

  20. Extinguisher recharging or replacement.

    violationRecord 9829925
    Lucky Friday · 1000088

    30 CFR 57.4203 · $151.00 proposed penalty

  21. Fire

    accidentRecord 220251060015
    Lucky Friday · 1000088

    Accident only

    Accident narrative

    Miner was mucking into a muck bay with a 2-Yard LHD. They had a full bucket and when attempting to dump it they got on uneven ground and as they raised the bucket the loader tipped over onto the right side. After it tipped, oil and fuel began to leak onto hot components of the exhaust and possibly the turbo which caused the fluids to ignite, resulting in the loader catching fire.

  22. Handling of materials

    accidentRecord 220251060012
    Lucky Friday · 1000088

    No dys awy frm wrk,no rstr act

    Accident narrative

    EE was moving a jumbo drill steel and pinched left ring finger between the steel and the metal box on the loader fender.

  23. Non-Injury Accident Investigation

    inspectionRecord 6948546
    Lucky Friday · 1000088

    44.5 on-site hours reported

  24. Regular Safety and Health Inspection

    inspectionRecord 6948547
    Lucky Friday · 1000088

    66.8 on-site hours reported

  25. Impoundment Spot Inspection

    inspectionRecord F017DBB
    Lucky Friday · 1000088

    3.3 on-site hours reported

Sources and definitions

MSHA Violations (issue date), Accidents (accident date) and Inspections (begin date).

Violation titles use current CFR headings to identify the cited rule; they are not the inspector’s account of what happened.

Status is from the current MSHA Mines snapshot, not the selected reporting period. Closed records can retain their last reported controller/operator.

Counts describe published rows, including contractor records; accident records are not distinct incidents or numbers of people injured.

Zero means no matching records in the imported sources, not proof of no events. Historical coverage differs by source; absence before a source begins reporting is not a zero incident rate. Invalid or absent dates and records after the snapshot are excluded.

S&S means SIG_SUB=Y. Fatality records use DEGREE_INJURY_CD=01. Proposed penalties are not final assessed or paid amounts; missing dollar values are omitted.

Inspection hours are SUM_TOTAL_ON_SITE_HOURS attributed to the inspection start date, without supervisor/trainee hours. Missing hours are omitted; a started inspection may still be open.

Portfolio totals use current mine membership, including events before the current owner or operator's tenure.