Coal production
0reported short tons
ACTIVE / OPERATOR PORTFOLIO
Membership and operating status are from the latest MSHA Mines snapshot. Open a mine for its ownership history.
MINE PORTFOLIO
2025-01-01 – 2026-10-13. Active records; production reporting is not required.
Material, method and type filters apply to this table. The portfolio’s status applies to the entire page. GEM fields describe their own release, not the selected MSHA year.
| Mine | Location / type | Coal · short tons | Hours worked | Violations | Accident records | On-site inspection hours |
|---|---|---|---|---|---|---|
| Lucky Friday1000088 · Active6/8 quarters reported | Shoshone, IDUnderground · MSHA: Silver Ore | 0 | 1,282,524 | 65 | 27 | 666.8 |
Production and hours sum available quarterly reports. — means unavailable; zero safety records means none in the selected imported period. Ownership reflects the current MSHA record.
LOCATION
1 of 1 mine with usable MSHA coordinates. Select a marker to open a mine.
2025 Q1 – 2026 Q4
Database snapshot · 2026-10-13. All 1 mines listed under this operator were checked; 1 have reports in the available quarters. Totals use current ownership.
reported short tons
reported employee hours
production ÷ hours worked
Missing values appear as —. Totals use available reports. Tons per hour requires production and hours for the same quarters and a nonzero hours total. * Striped bars mark partial mine coverage or an incomplete quarter. See the table for coverage.
| Quarter | Coal (short tons) | Hours worked | Tons / hour | Avg. employees | Coverage |
|---|---|---|---|---|---|
| 2025 Q1 | 0 | 215,088 | 0.00 | 430 | 1/1 mines reporting |
| 2025 Q2 | 0 | 210,664 | 0.00 | 430 | 1/1 mines reporting |
| 2025 Q3 | 0 | 212,962 | 0.00 | 431 | 1/1 mines reporting |
| 2025 Q4 | 0 | 203,218 | 0.00 | 438 | 1/1 mines reporting |
| 2026 Q1 | 0 | 220,033 | 0.00 | 445 | 1/1 mines reporting |
| 2026 Q2 | 0 | 220,559 | 0.00 | 457 | 1/1 mines reporting |
| 2026 Q3 | — | — | — | — | No report |
| 2026 Q4 | — | — | — | — | No report |
2025-01-01 – 2026-10-13
8 significant & substantial (S&S)
0 records classified as fatality
63 of 65 violations with amounts
20 inspections · 20 with hours
Counts are published records, including contractor records. * The quarter was incomplete at the snapshot date; recent counts may rise as reports arrive. — means no reported amount or hours. Portfolio totals use current membership.
| Quarter | Violations | S&S | Proposed USD | Accident records | Fatality records | Inspections | On-site hours |
|---|---|---|---|---|---|---|---|
| 2025-Q1 | 7 | 1 | 11,475.00 | 2 | 0 | 2 | 71.8 |
| 2025-Q2 | 10 | 2 | 5,212.00 | 7 | 0 | 4 | 118.3 |
| 2025-Q3 | 2 | 0 | 549.00 | 4 | 0 | 2 | 69.0 |
| 2025-Q4 | 21 | 1 | 6,561.00 | 4 | 0 | 2 | 118.3 |
| 2026-Q1 | 14 | 1 | 4,736.00 | 4 | 0 | 3 | 104.3 |
| 2026-Q2 | 6 | 2 | 3,600.00 | 1 | 0 | 4 | 90.5 |
| 2026-Q3 | 5 | 1 | 957.00 | 5 | 0 | 3 | 94.8 |
| 2026-Q4 * | 0 | 0 | — | 0 | 0 | 0 | — |
All violations issued in the selected period. Counts combine subsections.
HANDTOOLS (NONPOWERED) · DAYS AWAY FROM WORK ONLY
A millwright was attempting to get a flange on a pump aligned to put in the flange bolts. A second employee was attempting to assist maneuvering the pipe with a pry bar and the pry bar slipped, pinching the millwright's right thumb between the bar and the flange on the charge line resulting in a laceration requiring sutures.
Impoundment Spot Inspection · 1.8 on-site hours
MACHINERY · NO DYS AWY FRM WRK,NO RSTR ACT
A development miner was installing 12-foot rebar bolts in the back with a jackleg drill. The previous bolt that they attempted to install set up before it was driven so there was about 8" of the bolt exposed. The miner was holding on to the bolt and their hand slipped off the bolt causing it to spring back & strike the employee in the upper lip resulting in a laceration.
HOISTING · ACCIDENT ONLY
Hoistman was signaled to move north conveyance into position for weekly cage inspections at the #2 shaft top station and the hoist tripped out on YA1 Converter fault. Electricians and an ABB technician performed troubleshooting and identified the cause to be a faulty breaker.
HANDLING OF MATERIALS · NO DYS AWY FRM WRK,NO RSTR ACT
A mobile maintenance mechanic was changing out a grease barrel on a lube truck and when they were picking up the pump and lid to reinstall it on the drum, they lost grip of the pump and when they attempted to catch it, the sharp edge of the lid on the pump caused a laceration on their left thumb requiring two sutures.
HOISTING · ACCIDENT ONLY
A jumbo carriage was being lowered using the Service Hoist & was suspended under the conveyance & shoed to the shaft guides. At the 3,500' level, the hoist program detected a change in weight resulting in the hoist program stopping the hoist. Shaft repair crew went to inspect and at 10:47 AM, it was determined that the shoes came off the guide making the hoist unavailable for use.
Non-Injury Accident Investigation · 29.5 on-site hours
Description not reported
57.20011 · S&S · $504.00 proposed
57.12030 · $151.00 proposed
57.12018 · $151.00 proposed
57.6160(b)(3) · $151.00 proposed
Regular Safety and Health Inspection · 63.5 on-site hours
Spot Inspection · 5.8 on-site hours
Compliance Follow-up Inspection · 2.3 on-site hours
57.4361(b)(1) · $1,219.00 proposed
57.4104(b)(1) · $313.00 proposed
57.11001 · $151.00 proposed
57.14115(b) · S&S · $883.00 proposed
57.20003(a) · $151.00 proposed
57.12032 · S&S · $883.00 proposed
Impoundment Spot Inspection · 1.5 on-site hours
Regular Safety and Health Inspection · 81.0 on-site hours
HANDLING OF MATERIALS · DYS AWY FRM WRK & RESTRCTD ACT
While a miner and EE's partner were building a sand wall, the center cap came down coming in contact with the miner's leg. Resulting in a hairline fracture to the tibia.
HOISTING · ACCIDENT ONLY
The mine experienced a weather event that created a power outage which took the hoists down.
MSHA Violations (issue date), Accidents (accident date), and Inspections (begin date). Snapshot 2026-10-13.
Counts describe published rows, including contractor records; accident records are not distinct incidents or numbers of people injured.
Zero means no matching records in the imported sources, not proof of no events. Historical coverage differs by source; absence before a source begins reporting is not a zero incident rate. Invalid or absent dates and records after the snapshot are excluded.
S&S means SIG_SUB=Y. Fatality records use DEGREE_INJURY_CD=01. Proposed penalties are not final assessed or paid amounts; missing dollar values are omitted.
Inspection hours are SUM_TOTAL_ON_SITE_HOURS attributed to the inspection start date, without supervisor/trainee hours. Missing hours are omitted; a started inspection may still be open.
Portfolio totals use current mine membership, including events before the current owner or operator's tenure.
CFR headings link to the current Title 30 index; they are not historical legal determinations.
SELECTED PORTFOLIO
Relationships reflect the selected mine status and current MSHA controller/operator fields.