Coal production
0reported short tons
ACTIVE / CONTROLLER PORTFOLIO
Membership and operating status are from the latest MSHA Mines snapshot. Open a mine for its ownership history.
MINE PORTFOLIO
2025-01-01 – 2026-10-18. Active records; production reporting is not required.
Material, method and type filters apply to this table. The portfolio’s status applies to the entire page. GEM fields describe their own release, not the selected MSHA year.
| Mine | Location / type | Coal · short tons | Hours worked | Violations | Accident records | On-site inspection hours |
|---|---|---|---|---|---|---|
| Mesabi Metallics Company LLC2103751 · Active6/8 quarters reported | Itasca, MNSurface · MSHA: Iron Ore | 0 | 363,637 | 101 | 51 | 484.3 |
Production and hours sum available quarterly reports. — means unavailable; zero safety records means none in the selected imported period. Ownership reflects the current MSHA record.
LOCATION
1 of 1 mine with usable MSHA coordinates. Select a marker to open a mine.
2025 Q1 – 2026 Q4
Database snapshot · 2026-10-18. All 1 mines listed under this controller were checked; 1 have reports in the available quarters. Totals use current ownership.
reported short tons
reported employee hours
production ÷ hours worked
Missing values appear as —. Totals use available reports. Tons per hour requires production and hours for the same quarters and a nonzero hours total. * Striped bars mark partial mine coverage or an incomplete quarter. See the table for coverage.
| Quarter | Coal (short tons) | Hours worked | Tons / hour | Avg. employees | Coverage |
|---|---|---|---|---|---|
| 2025 Q1 | 0 | 50,548 | 0.00 | 102 | 1/1 mines reporting |
| 2025 Q2 | 0 | 61,550 | 0.00 | 120 | 1/1 mines reporting |
| 2025 Q3 | 0 | 29,934 | 0.00 | 70 | 1/1 mines reporting |
| 2025 Q4 | 0 | 46,574 | 0.00 | 88 | 1/1 mines reporting |
| 2026 Q1 | 0 | 52,843 | 0.00 | 106 | 1/1 mines reporting |
| 2026 Q2 | 0 | 122,188 | 0.00 | 135 | 1/1 mines reporting |
| 2026 Q3 | — | — | — | — | No report |
| 2026 Q4 | — | — | — | — | No report |
2025-01-01 – 2026-10-18
38 significant & substantial (S&S)
0 records classified as fatality
59 of 101 violations with amounts
49 inspections · 49 with hours
Counts are published records, including contractor records. * The quarter was incomplete at the snapshot date; recent counts may rise as reports arrive. — means no reported amount or hours. Portfolio totals use current membership.
| Quarter | Violations | S&S | Proposed USD | Accident records | Fatality records | Inspections | On-site hours |
|---|---|---|---|---|---|---|---|
| 2025-Q1 | 3 | 0 | 453.00 | 4 | 0 | 3 | 22.5 |
| 2025-Q2 | 3 | 0 | 453.00 | 2 | 0 | 2 | 28.3 |
| 2025-Q3 | 0 | 0 | — | 2 | 0 | 1 | 1.3 |
| 2025-Q4 | 10 | 2 | 1,527.00 | 7 | 0 | 2 | 61.3 |
| 2026-Q1 | 23 | 3 | 5,192.00 | 8 | 0 | 8 | 122.5 |
| 2026-Q2 | 17 | 7 | 4,524.00 | 20 | 0 | 11 | 114.5 |
| 2026-Q3 | 40 | 24 | 1,028.00 | 8 | 0 | 21 | 131.3 |
| 2026-Q4 * | 5 | 2 | — | 0 | 0 | 1 | 2.8 |
All violations issued in the selected period. Counts combine subsections.
103 (g) Written Notification Hazard Complaint Inspectio · 1.5 on-site hours
SLIP OR FALL OF PERSON · NO DYS AWY FRM WRK,NO RSTR ACT
EE was coming down stairs which were wet from rain. EE stated EE headed down the stairs and the handrail was wet, EE stepped wrong and rolled EE's ankle. This caused pain to the outside of EE's ankle and to the top of the foot.
HANDLING OF MATERIALS · ALL OTHER CASES (INCL 1ST AID)
EE was in the process of cleaning the shaft of the fan. Crew recognized the hazards of the insulation pins prior to starting work and had bent them down to decrease the potential of sticking themselves. During the cleaning of the fan shaft EE bent elbow to move and caught back of arm/elbow with the pin causing sharp point to impale the tip into skin. Caused a small puncture wound.
MACHINERY · ALL OTHER CASES (INCL 1ST AID)
Welding when a piece of slag fell and burned through EE's jeans.
STEPPING OR KNEELING ON OBJECT · DAYS RESTRICTED ACTIVITY ONLY
kneeling while wiring a vfd, this building has concert floor, dry and level.
STRIKING OR BUMPING · NO DYS AWY FRM WRK,NO RSTR ACT
EE was walking on grating that had been installed in slurry bridge. Crew was in the process of lifting the slurry tank agitator gearbox to do a test fit for the millwrights. Piece was overhead, EE was watching the piece and not watching where they were in relation to the open hole. EE stepped off the grating, there is a clip on the beam that EE struck shin on causing cut about 3".
SLIP OR FALL OF PERSON · DAYS AWAY FROM WORK ONLY
Employee was cleaning out the thickener tanks on the south end. While cleaning, employee slipped on mud. Employee fell and twisted left knee.
103 (g) Written Notification Hazard Complaint Inspectio · 2.0 on-site hours
MACHINERY · NO DYS AWY FRM WRK,NO RSTR ACT
Employee lost control of grinder and cut EE's leg.
HANDTOOLS (NONPOWERED) · NO DYS AWY FRM WRK,NO RSTR ACT
EE and crew were turning a floor brace using a sleever bar in one of the bolt holes. Brace was on flat side. EE standing on E side of the N/S aligned brace pulling on the bar toward EE. In the line of fire when piece reached tipping point where crew needed it for rigging to put in place. Piece reached tipping point, EE lost footing. The sleever bar struck EE's leg causing cut.
HANDLING OF MATERIALS · NO DYS AWY FRM WRK,NO RSTR ACT
EE and partner were setting up a jig to assist in fit up of the ring to the duct work. EE was holding the piece low to assist in getting the jig welded to the duct. EE's partner stuck EE's weld rod to tack up the piece and rod got stuck. When EE went to remove the rod, the piece fell and landed on EE's pinky fingertip which caused a laceration. EE did have gloves on.
NONPOWERED HAULAGE · NO DYS AWY FRM WRK,NO RSTR ACT
While moving a skirt that goes on to a conveyor, weighing approx. 150-200 pounds, while on a skate it slid off and pinched left thumb. EE was rushing and did not wait for other staff to secure it before moving it.
103 (g) Written Notification Hazard Complaint Inspectio · 11.0 on-site hours
HANDLING OF MATERIALS · NO DYS AWY FRM WRK,NO RSTR ACT
EE was assisting spreading a telehandler forks, while they tilted mast down to facilitate tine adjustment, the right tine was moved, after EE began sliding the L tine outward. During this process, the R tine slid back unexpectedly. EE attempted to reposition the R tine w/EE's gloved L hand, EE L middle finger got pinched between tine and mast's lower bar. Skin tear on L finger.
MACHINERY · NO DYS AWY FRM WRK,NO RSTR ACT
Employee was using an oxygen/acetylene torch to heat and shape rebar material. The worker inadvertently tripped over the torch hose, which resulted in a loss of balance. As a result of the trip, the worker unintentionally made contact with the active torch flame, causing a burn to the left wrist, just above the cuff of the glove.
56.16007(a) · $151.00 proposed
56.11016 · S&S · $177.00 proposed
56.14207 · $151.00 proposed
56.16005 · $151.00 proposed
HANDLING OF MATERIALS · DAYS AWAY FROM WORK ONLY
Cable pull, picking up cable for refeeding into vault. Cable was being fed into vault and pulled out by hand to get it prepped for next pull into building from this vault.
56.12032 · $151.00 proposed
56.12018 · $151.00 proposed
56.14207 · $151.00 proposed
56.4201(b) · $151.00 proposed
HANDTOOLS (NONPOWERED) · NO DYS AWY FRM WRK,NO RSTR ACT
Employee was holding a bull pin with their right/dominant hand and missed, hitting it with a hammer with their left hand and instead hit their right hand with the hammer.
MSHA Violations (issue date), Accidents (accident date), and Inspections (begin date). Snapshot 2026-10-18.
Counts describe published rows, including contractor records; accident records are not distinct incidents or numbers of people injured.
Zero means no matching records in the imported sources, not proof of no events. Historical coverage differs by source; absence before a source begins reporting is not a zero incident rate. Invalid or absent dates and records after the snapshot are excluded.
S&S means SIG_SUB=Y. Fatality records use DEGREE_INJURY_CD=01. Proposed penalties are not final assessed or paid amounts; missing dollar values are omitted.
Inspection hours are SUM_TOTAL_ON_SITE_HOURS attributed to the inspection start date, without supervisor/trainee hours. Missing hours are omitted; a started inspection may still be open.
Portfolio totals use current mine membership, including events before the current owner or operator's tenure.
CFR headings link to the current Title 30 index; they are not historical legal determinations.
SELECTED PORTFOLIO
Relationships reflect the selected mine status and current MSHA controller/operator fields.