Coal production
0reported short tons
ACTIVE / CONTROLLER PORTFOLIO
David C Lynch Sr; Gregory P Lynch Sr; Stephen P Lynch Jr
Membership and operating status are from the latest MSHA Mines snapshot. Open a mine for its ownership history.
MSHA CONTROLLER IDM10524
MINE PORTFOLIO
3 of 3 mines and facilities
2025-01-01 – 2026-10-18. Active records; production reporting is not required.
Material, method and type filters apply to this table. The portfolio’s status applies to the entire page. GEM fields describe their own release, not the selected MSHA year.
| Mine | Location / type | Coal · short tons | Hours worked | Violations | Accident records | On-site inspection hours |
|---|---|---|---|---|---|---|
| HAIN MATERIALS CORP0600411 · Active6/8 quarters reported | Windham, CTSurface · MSHA: Construction Sand and Gravel | 0 | 14,850 | 15 | 0 | 49.5 |
| LYNCH CORP3700070 · Active6/8 quarters reported | Providence, RISurface · MSHA: Construction Sand and Gravel | 0 | 10,741 | 13 | 1 | 107.5 |
| Tiverton Materials3700181 · Active6/8 quarters reported | Newport, RISurface · MSHA: Crushed, Broken Granite | 0 | 14,469 | 1 | 0 | 24.8 |
Production and hours sum available quarterly reports. — means unavailable; zero safety records means none in the selected imported period. Ownership reflects the current MSHA record.
LOCATION
Portfolio map
3 of 3 mines with usable MSHA coordinates. Select a marker to open a mine.
Mine coordinates
- HAIN MATERIALS CORP41.68472, -72.16444Open map ↗
- LYNCH CORP41.92917, -71.41583Open map ↗
- Tiverton Materials41.64750, -71.18528Open map ↗
Quarterly trends
2025 Q1 – 2026 Q4
Database snapshot · 2026-10-18. All 3 mines listed under this controller were checked; 3 have reports in the available quarters. Totals use current ownership.
Hours worked
40,060reported employee hours
Tons per hour
0.00production ÷ hours worked
Missing values appear as —. Totals use available reports. Tons per hour requires production and hours for the same quarters and a nonzero hours total. * Striped bars mark partial mine coverage or an incomplete quarter. See the table for coverage.
Quarterly data and reporting coverage
| Quarter | Coal (short tons) | Hours worked | Tons / hour | Avg. employees | Coverage |
|---|---|---|---|---|---|
| 2025 Q1 | 0 | 6,192 | 0.00 | 16 | 3/3 mines reporting |
| 2025 Q2 | 0 | 8,029 | 0.00 | 15 | 3/3 mines reporting |
| 2025 Q3 | 0 | 7,996 | 0.00 | 20 | 3/3 mines reporting |
| 2025 Q4 | 0 | 7,349 | 0.00 | 16 | 3/3 mines reporting |
| 2026 Q1 | 0 | 4,012 | 0.00 | 14 | 3/3 mines reporting |
| 2026 Q2 | 0 | 6,482 | 0.00 | 16 | 3/3 mines reporting |
| 2026 Q3 | — | — | — | — | No report |
| 2026 Q4 | — | — | — | — | No report |
Safety and enforcement
2025-01-01 – 2026-10-18
Violations
295 significant & substantial (S&S)
Accident records
11 records classified as fatality
Proposed penalties · USD
9,199.0028 of 29 violations with amounts
On-site inspection hours
181.7515 inspections · 15 with hours
Counts are published records, including contractor records. * The quarter was incomplete at the snapshot date; recent counts may rise as reports arrive. — means no reported amount or hours. Portfolio totals use current membership.
Quarterly safety data
| Quarter | Violations | S&S | Proposed USD | Accident records | Fatality records | Inspections | On-site hours |
|---|---|---|---|---|---|---|---|
| 2025-Q1 | 5 | 1 | 2,066.00 | 0 | 0 | 2 | 17.3 |
| 2025-Q2 | 1 | 0 | 177.00 | 0 | 0 | 2 | 12.3 |
| 2025-Q3 | 6 | 0 | 755.00 | 1 | 1 | 3 | 92.5 |
| 2025-Q4 | 0 | 0 | — | 0 | 0 | 0 | — |
| 2026-Q1 | 7 | 2 | 4,691.00 | 0 | 0 | 3 | 20.0 |
| 2026-Q2 | 2 | 0 | 302.00 | 0 | 0 | 1 | 19.0 |
| 2026-Q3 | 8 | 2 | 1,208.00 | 0 | 0 | 4 | 20.8 |
| 2026-Q4 * | 0 | 0 | — | 0 | 0 | 0 | — |
Most cited CFR sections
All violations issued in the selected period. Counts combine subsections.
Safety activity
- LYNCH CORP · 3700070
Verbal Hazard Complaint Inspections · 9.0 on-site hours
- LYNCH CORP · 3700070
46.7(b) · $151.00 proposed
- LYNCH CORP · 3700070
46.9(b)(3) · $151.00 proposed
- LYNCH CORP · 3700070
Spot Inspection · 8.8 on-site hours
- LYNCH CORP · 3700070
46.7(b) · $151.00 proposed
- LYNCH CORP · 3700070
46.3(a) · $151.00 proposed
- LYNCH CORP · 3700070
56.23002(b) · $151.00 proposed
- LYNCH CORP · 3700070
POWERED HAULAGE · FATALITY
Accident narrative
IDS driver was instructed by Lynch to dump employee's load under unsafe conditions. The berm that the Lynch operator constructed was inadequate/non-existent due to the pile being dug into by Lynch from below. This caused the earth to fall away under back tires. End dump rolled down embankment flipping and landing on its roof. Employee was pronounced dead at the hospital.
- LYNCH CORP · 3700070
Fatal Accident Investigation · 74.8 on-site hours
- LYNCH CORP · 3700070
Description not reported
- Tiverton Materials · 3700181
Regular Safety and Health Inspection · 6.5 on-site hours
- HAIN MATERIALS CORP · 0600411
Regular Safety and Health Inspection · 5.8 on-site hours
- HAIN MATERIALS CORP · 0600411
56.12004 · $177.00 proposed
- Tiverton Materials · 3700181
46.3(a) · $151.00 proposed
- Tiverton Materials · 3700181
Regular Safety and Health Inspection · 8.5 on-site hours
- HAIN MATERIALS CORP · 0600411
Regular Safety and Health Inspection · 8.8 on-site hours
- HAIN MATERIALS CORP · 0600411
56.14101(a)(2) · $151.00 proposed
- HAIN MATERIALS CORP · 0600411
56.14115(b) · S&S · $1,320.00 proposed
- HAIN MATERIALS CORP · 0600411
56.20003(a) · $177.00 proposed
- HAIN MATERIALS CORP · 0600411
56.12032 · $267.00 proposed
Safety sources and definitions
MSHA Violations (issue date), Accidents (accident date), and Inspections (begin date). Snapshot 2026-10-18.
Counts describe published rows, including contractor records; accident records are not distinct incidents or numbers of people injured.
Zero means no matching records in the imported sources, not proof of no events. Historical coverage differs by source; absence before a source begins reporting is not a zero incident rate. Invalid or absent dates and records after the snapshot are excluded.
S&S means SIG_SUB=Y. Fatality records use DEGREE_INJURY_CD=01. Proposed penalties are not final assessed or paid amounts; missing dollar values are omitted.
Inspection hours are SUM_TOTAL_ON_SITE_HOURS attributed to the inspection start date, without supervisor/trainee hours. Missing hours are omitted; a started inspection may still be open.
Portfolio totals use current mine membership, including events before the current owner or operator's tenure.
CFR headings link to the current Title 30 index; they are not historical legal determinations.
SELECTED PORTFOLIO
3 linked operators.
Relationships reflect the selected mine status and current MSHA controller/operator fields.