HM Pacific Northwest, Inc. safety activity
MSHA violations, accident reports and inspections across the current mine portfolio.
Safety activity
Impoundment Spot Inspection
Lewisville Pit · 45032930.0 on-site hours reported
Horns and backup alarms.
Heidelberg Materials High Rock Quarry · 450199930 CFR 56.14132(b)(2)
Safety can use.
Heidelberg Materials High Rock Quarry · 450199930 CFR 56.4402
Safety defects; examination, correction and records.
Heidelberg Materials High Rock Quarry · 450199930 CFR 56.14100(c)
Construction and maintenance of guards.
Heidelberg Materials High Rock Quarry · 450199930 CFR 56.14112(b)
Identification of power switches.
Heidelberg Materials High Rock Quarry · 450199930 CFR 56.12018
Construction and maintenance of guards.
Heidelberg Materials High Rock Quarry · 450199930 CFR 56.14112(b)
Housekeeping.
Heidelberg Materials High Rock Quarry · 450199930 CFR 56.20003(a) · Significant and substantial (S&S)
Construction and maintenance of guards.
Heidelberg Materials High Rock Quarry · 450199930 CFR 56.14112(b) · Significant and substantial (S&S)
Inspection.
Heidelberg Materials High Rock Quarry · 450199930 CFR 56.4201(a)(1)
Construction and maintenance of ladders.
Heidelberg Materials High Rock Quarry · 450199930 CFR 56.11003
Inspection and cover plates.
Heidelberg Materials High Rock Quarry · 450199930 CFR 56.12032
Regular Safety and Health Inspection
Heidelberg Materials High Rock Quarry · 450199937.8 on-site hours reported
Special Emphasis Programs
Canby Pit · 35035082.3 on-site hours reported
Handling of materials
Heidelberg Materials High Rock Quarry · 4501999Days away from work only
Accident narrative
QC Tech reported lower back pain on 9/24/26 while lowering a filled propane tank from a work truck. Employee continued working in a JOI capacity. Subsequent medical evaluation resulted in updated work restrictions. Employee also reported aggravation of symptoms during non-work activities after the initial event. Report submitted upon receipt of updated medical information.
Striking or bumping
Thun Field Pit · 4501111No dys awy frm wrk,no rstr act
Accident narrative
Two employees were reinstalling guards and cleaning around the 1�-inch feed-belt tail pulley. While exiting the area with a pry bar, one employee stepped into wet accumulated material, causing EE's foot to sink. As EE pulled free, EE struck EE's forehead on a fixed crossbar. EE sustained a laceration above EE's right eyebrow and received nine stitches.
Impoundment Spot Inspection
Thun Field Pit · 45011111.5 on-site hours reported
Special Emphasis Programs
Thun Field Pit · 45011110.8 on-site hours reported
Impoundment Spot Inspection
Thun Field Pit · 45011111.3 on-site hours reported
Health Technical Investigation
Granite Falls Quarry · 450342420.0 on-site hours reported
Spot Inspection
North Bend · 45035470.0 on-site hours reported
General instructions for completing MSHA Form 7000-1.
North Bend · 450354730 CFR 50.20-1 · $151.00 proposed penalty
Spot Inspection
Canby Pit · 35035080.0 on-site hours reported
Preparation and submission of MSHA Report Form 7000-1—Mine Accident, Injury, and Illness Report.
Canby Pit · 350350830 CFR 50.20(a) · $151.00 proposed penalty
Impoundment Spot Inspection
Lewisville Pit · 45032933.0 on-site hours reported
Sources and definitions
MSHA Violations (issue date), Accidents (accident date) and Inspections (begin date).
Violation titles use current CFR headings to identify the cited rule; they are not the inspector’s account of what happened.
Status is from the current MSHA Mines snapshot, not the selected reporting period. Closed records can retain their last reported controller/operator.
Counts describe published rows, including contractor records; accident records are not distinct incidents or numbers of people injured.
Zero means no matching records in the imported sources, not proof of no events. Historical coverage differs by source; absence before a source begins reporting is not a zero incident rate. Invalid or absent dates and records after the snapshot are excluded.
S&S means SIG_SUB=Y. Fatality records use DEGREE_INJURY_CD=01. Proposed penalties are not final assessed or paid amounts; missing dollar values are omitted.
Inspection hours are SUM_TOTAL_ON_SITE_HOURS attributed to the inspection start date, without supervisor/trainee hours. Missing hours are omitted; a started inspection may still be open.
Portfolio totals use current mine membership, including events before the current owner or operator's tenure.