Heidelberg Materials Southeast Agg., LLC safety activity
MSHA violations, accident reports and inspections across the current mine portfolio.
Safety activity
Regular Safety and Health Inspection
Sandy Flat Quarry · 380031025.5 on-site hours reported
Regular Safety and Health Inspection
HOLLY SPRINGS QUARRY · 310207418.8 on-site hours reported
Regular Safety and Health Inspection
Columbia Sand · 38001307.8 on-site hours reported
Berms or guardrails.
Columbia Sand · 380013030 CFR 56.9300(a) · Significant and substantial (S&S) · $883.00 proposed penalty
Horns and backup alarms.
Columbia Sand · 380013030 CFR 56.14132(a) · $177.00 proposed penalty
Construction and maintenance of guards.
Lithonia/Pine Mountain Quarry · 090006330 CFR 56.14112(b) · $151.00 proposed penalty
Safety belts and lines.
Lithonia/Pine Mountain Quarry · 090006330 CFR 56.15005 · Significant and substantial (S&S) · $504.00 proposed penalty
Regular Safety and Health Inspection
Lithonia/Pine Mountain Quarry · 09000630.0 on-site hours reported
Regular Safety and Health Inspection
Pelham Quarry · 380056711.3 on-site hours reported
Regular Safety and Health Inspection
Clinton Quarry · 38007315.5 on-site hours reported
Machinery, equipment, and tools.
Clinton Quarry · 380073130 CFR 56.14205 · $151.00 proposed penalty
Regular Safety and Health Inspection
Elliott Sand & Gravel · 310052016.0 on-site hours reported
Regular Safety and Health Inspection
Sparta Quarry · 090103310.0 on-site hours reported
New miner training.
Sparta Quarry · 090103330 CFR 46.5(a) · Significant and substantial (S&S) · $1,066.00 proposed penalty
Handtools (nonpowered)
Monroe County Quarry · 0901020No dys awy frm wrk,no rstr act
Accident narrative
The employee was using a large hammer and striking wrench to loosen the locking nut on a crusher mantle. The employee stopped to steady themselves and put a hand on the edge of the wrench. A burr had been raised on the wrench edge due to the hammer blows, which cut through the employee's glove and into their left palm.
Spot Inspection
Columbia Sand · 380013012.0 on-site hours reported
Powered haulage
Lithonia/Pine Mountain Quarry · 0900063Days restricted activity only
Accident narrative
Operator was scooping GAB from the pile when the top of the pile sloughed off and filled the bucket, causing the loader to lose balance and tip forward. The operator quickly dropped the bucket, causing the rear of the loader to fall back to the ground and jar the driver. The driver reported experiencing soreness in their back after the event.
Regular Safety and Health Inspection
ANDERSON QUARRY · 380025026.8 on-site hours reported
Construction and maintenance of guards.
ANDERSON QUARRY · 380025030 CFR 56.14112(a)(1) · $151.00 proposed penalty
Regular Safety and Health Inspection
Habersham Quarry · 09006937.0 on-site hours reported
Regular Safety and Health Inspection
Toccoa Quarry · 09000514.0 on-site hours reported
Protection of persons at switchgear.
Toccoa Quarry · 090005130 CFR 56.12020 · $151.00 proposed penalty
Housekeeping.
Toccoa Quarry · 090005130 CFR 56.20003(c) · $151.00 proposed penalty
Compliance Follow-up Inspection
BREWER SAND · 38001221.3 on-site hours reported
Construction and maintenance of guards.
Gainesville Quarry · 090003430 CFR 56.14112(a)(1) · $151.00 proposed penalty
Sources and definitions
MSHA Violations (issue date), Accidents (accident date) and Inspections (begin date).
Violation titles use current CFR headings to identify the cited rule; they are not the inspector’s account of what happened.
Status is from the current MSHA Mines snapshot, not the selected reporting period. Closed records can retain their last reported controller/operator.
Counts describe published rows, including contractor records; accident records are not distinct incidents or numbers of people injured.
Zero means no matching records in the imported sources, not proof of no events. Historical coverage differs by source; absence before a source begins reporting is not a zero incident rate. Invalid or absent dates and records after the snapshot are excluded.
S&S means SIG_SUB=Y. Fatality records use DEGREE_INJURY_CD=01. Proposed penalties are not final assessed or paid amounts; missing dollar values are omitted.
Inspection hours are SUM_TOTAL_ON_SITE_HOURS attributed to the inspection start date, without supervisor/trainee hours. Missing hours are omitted; a started inspection may still be open.
Portfolio totals use current mine membership, including events before the current owner or operator's tenure.