TUNNEL RIDGE MINE safety activity
MSHA violations, accident reports and inspections.
Safety activity
Spot Inspections
103(i) · 5.5 on-site hours reported
Requirement for container labels.
30 CFR 47.41(a) · $151.00 proposed penalty
Fall of roof or back
Days away from work only
Accident narrative
Employee climbed into the locked-out longwall pan line, under the protection of a shield, to relieve the ranging arm hydraulic pressure buildup so a broken cutter shaft could be safely removed. A rock fell from the top in front of the shield tip, deflected off the shearer drum, and struck employee in the shin.
Slip or fall of person
Days away from work only
Accident narrative
Employee was walking on the concrete floor near the tail of the North Mains #2 conveyor entry and slipped on wet rock dust.
Accumulation of combustible materials.
30 CFR 75.400 · $432.00 proposed penalty
Handling of materials
No dys awy frm wrk,no rstr act
Accident narrative
Employee was helping install the trapping shoe and left index finger was pinched between the trapping shoe and rack wheel.
Spot Inspections
103(i) · 7.0 on-site hours reported
Mine ventilation plan; submission and approval.
30 CFR 75.370(a)(1) · $151.00 proposed penalty
Handling of materials
No dys awy frm wrk,no rstr act
Accident narrative
Employee was helping another employee remove a hydraulic hose. A third employee had radioed the pressure had been released from the line. The injured employee was holding the hose as the other employee removed the staple. After the staple was removed the hose whipped out of the injured employee's hand and struck EE's right index finger.
Electrical Technical Investigation
12.5 on-site hours reported
Machinery
Days away from work only
Accident narrative
Employee was helping winch a shield ram jack. As EE lifted the jack over a shield toe to keep it from getting bound EE felt a pop in EE's right shoulder. EE treated and was released with limitations we could accommodate. EE continued working EE's regular job while receiving PT until, on April 22, it was determined surgery would be required. EE's last day worked was April 25.
Handling of materials
Days away from work only
Accident narrative
Employee's left foot was pinched between a shield toe and relay bar while working on the 5 Right longwall set-up face.
Spot Inspections
103(i) · 6.0 on-site hours reported
Temporary, portable containers.
30 CFR 47.44(b) · $151.00 proposed penalty
Spot Inspections
103(i) · 8.0 on-site hours reported
Accumulation of combustible materials.
30 CFR 75.400 · $151.00 proposed penalty
Training of new miners; minimum courses of instruction; hours of instruction.
30 CFR 48.25(a) · Significant and substantial (S&S) · $197.00 proposed penalty
Loading and haulage equipment; operation.
30 CFR 77.1607(n) · Significant and substantial (S&S) · $177.00 proposed penalty
Mechanical equipment guards.
30 CFR 77.400(a) · $366.00 proposed penalty
Spot Inspections
103(i) · 8.0 on-site hours reported
Accumulation of combustible materials.
30 CFR 75.400 · $151.00 proposed penalty
Accumulation of combustible materials.
30 CFR 75.400 · $432.00 proposed penalty
Other safeguards.
30 CFR 75.1403 · $151.00 proposed penalty
Roof Control Technical Investigation
14.8 on-site hours reported
Spot Inspections
103(i) · 7.0 on-site hours reported
Sources and definitions
MSHA Violations (issue date), Accidents (accident date) and Inspections (begin date).
Violation titles use current CFR headings to identify the cited rule; they are not the inspector’s account of what happened.
Counts describe published rows, including contractor records; accident records are not distinct incidents or numbers of people injured.
Zero means no matching records in the imported sources, not proof of no events. Historical coverage differs by source; absence before a source begins reporting is not a zero incident rate. Invalid or absent dates and records after the snapshot are excluded.
S&S means SIG_SUB=Y. Fatality records use DEGREE_INJURY_CD=01. Proposed penalties are not final assessed or paid amounts; missing dollar values are omitted.
Inspection hours are SUM_TOTAL_ON_SITE_HOURS attributed to the inspection start date, without supervisor/trainee hours. Missing hours are omitted; a started inspection may still be open.
Portfolio totals use current mine membership, including events before the current owner or operator's tenure.