Search

← Tata Chemicals Mine

Tata Chemicals Mine safety activity

MSHA violations, accident reports and inspections.

2025-01-01 – 2026-10-31Database snapshot · 2026-10-31

Safety activity

  1. Approved equipment (III mines).

    violationRecord 5051508

    30 CFR 57.22305 · $642.00 proposed penalty

  2. Slip or fall of person

    accidentRecord 220250990023

    Days away from work only

    Accident narrative

    Cat Operator was fueling Cat D9 Dozer at the Heavy Equipment Yard. Operator fell from the dozer and landed on the driver's side blade tilt cylinder. As a result, operator broke three left ribs and bruising to the left side of body.

  3. Spot Inspections

    inspectionRecord F01B337

    103(i) · 5.3 on-site hours reported

  4. Regular Safety and Health Inspection

    inspectionRecord F01B336

    199.8 on-site hours reported

  5. Spot Inspections

    inspectionRecord F01B333

    103(i) · 5.0 on-site hours reported

  6. Spot Inspection

    inspectionRecord F012551

    1.0 on-site hours reported

  7. Spot Inspections

    inspectionRecord F012550

    103(i) · 4.0 on-site hours reported

  8. Hoisting

    accidentRecord 220250870001

    Accident only

    Accident narrative

    One of the electrical systems failed on our primary escapeway shaft. There are redundant systems in place, the shaft was never out of operation. The hotline was called as a courtesy.

  9. Spot Inspections

    inspectionRecord F019AB5

    103(i) · 6.5 on-site hours reported

  10. Spot Inspections

    inspectionRecord F019AB4

    103(i) · 5.0 on-site hours reported

  11. Spot Inspections

    inspectionRecord F01B32D

    103(i) · 4.3 on-site hours reported

  12. Spot Inspections

    inspectionRecord F019AB1

    103(i) · 4.0 on-site hours reported

  13. Spot Inspections

    inspectionRecord F01B329

    103(i) · 4.0 on-site hours reported

  14. Spot Inspections

    inspectionRecord F012549

    103(i) · 6.0 on-site hours reported

  15. Spot Inspection

    inspectionRecord 6945375

    12.5 on-site hours reported

  16. Hoisting

    accidentRecord 220250510021

    Accident only

    Accident narrative

    #2 hoist (Primary) went down due to electrical problem, Maintenance Coordinator and electrician used #3 hoist to reach surface. Maintenance conducted troubleshooting and found a bad coil on the main brake. Maintenance replaced the bad coil on the main brake and #2 hoist was up and operating at 9:50 pm. #3 & #6 hoist were still operable during this time.

  17. Spot Inspections

    inspectionRecord F011241

    103(i) · 3.5 on-site hours reported

  18. Spot Inspections

    inspectionRecord F01123F

    103(i) · 6.0 on-site hours reported

  19. Safety defects; examination, correction and records.

    violationRecord 9722249

    30 CFR 57.14100(b) · $151.00 proposed penalty

  20. 103 (g) Written Notification Hazard Complaint Inspectio

    inspectionRecord F01123C

    2.0 on-site hours reported

  21. Spot Inspections

    inspectionRecord F01123D

    103(i) · 2.5 on-site hours reported

  22. Insulation and fittings for power wires and cables.

    violationRecord 9722247

    30 CFR 57.12008 · $151.00 proposed penalty

  23. Identification of power switches.

    violationRecord 9722246

    30 CFR 57.12018 · $151.00 proposed penalty

  24. Spot Inspections

    inspectionRecord F011239

    103(i) · 2.0 on-site hours reported

  25. Machinery, equipment, and tools.

    violationRecord 9722245

    30 CFR 57.14205 · $151.00 proposed penalty

Sources and definitions

MSHA Violations (issue date), Accidents (accident date) and Inspections (begin date).

Violation titles use current CFR headings to identify the cited rule; they are not the inspector’s account of what happened.

Counts describe published rows, including contractor records; accident records are not distinct incidents or numbers of people injured.

Zero means no matching records in the imported sources, not proof of no events. Historical coverage differs by source; absence before a source begins reporting is not a zero incident rate. Invalid or absent dates and records after the snapshot are excluded.

S&S means SIG_SUB=Y. Fatality records use DEGREE_INJURY_CD=01. Proposed penalties are not final assessed or paid amounts; missing dollar values are omitted.

Inspection hours are SUM_TOTAL_ON_SITE_HOURS attributed to the inspection start date, without supervisor/trainee hours. Missing hours are omitted; a started inspection may still be open.

Portfolio totals use current mine membership, including events before the current owner or operator's tenure.