← Shoals Mine

Shoals Mine safety activity

MSHA violations, accident reports and inspections.

2025-01-01 – 2026-10-31Database snapshot · 2026-10-31

Safety activity

  1. Regular Safety and Health Inspection

    inspectionRecord F007355

    5.5 on-site hours reported

  2. Hoisting

    accidentRecord 220262860023

    Accident only

    Accident narrative

    The hoist operator notified the relief supervisor that the hoist brake sounded as if it was slightly dragging and that it would most likely take longer than the allowed time to diagnose or fix. The relief supervisor then called for an evacuation of the miners. No miners were injured.

  3. Spot Inspection

    inspectionRecord F021D49

    11.0 on-site hours reported

  4. Hoisting

    accidentRecord 220262460008

    Accident only

    Accident narrative

    Hoist operator heard a buzzing noise coming from the breaker area for the main hoist. EE had an electrician look into it and said a coil could be getting ready to fail. As a precaution we took the main hoist out of service for diagnosis and/or repair. Miners evacuated out the escape shaft. No miners were injured.

  5. Regular Safety and Health Inspection

    inspectionRecord F007351

    32.8 on-site hours reported

  6. Spot Inspection

    inspectionRecord F030897

    7.5 on-site hours reported

  7. Training for mine rescue teams.

    violationRecord 5014436

    30 CFR 49.8 · $2,312.00 proposed penalty

  8. Regular Safety and Health Inspection

    inspectionRecord F021D28

    45.3 on-site hours reported

  9. Underground electric substations and liquid storage facilities.

    violationRecord 9780254

    30 CFR 57.4160(a)(1) · $151.00 proposed penalty

  10. Regular Safety and Health Inspection

    inspectionRecord F0070C2

    43.0 on-site hours reported

  11. Verbal Hazard Complaint Inspections

    inspectionRecord 7037850

    5.0 on-site hours reported

  12. Regular Safety and Health Inspection

    inspectionRecord F00E8A2

    63.5 on-site hours reported

  13. Spot Inspection

    inspectionRecord F01951B

    4.0 on-site hours reported

  14. Attachment of trailing cables.

    violationRecord 9785711

    30 CFR 57.12038 · $151.00 proposed penalty

  15. Safety defects; examination, correction and records.

    violationRecord 9785710

    30 CFR 57.14100(a) · $151.00 proposed penalty

  16. Identification of power switches.

    violationRecord 9785709

    30 CFR 56.12018 · $151.00 proposed penalty

  17. Horns and backup alarms.

    violationRecord 9785708

    30 CFR 56.14132(b)(2) · $151.00 proposed penalty

  18. Powered haulage

    accidentRecord 220252370025

    Days restricted activity only

    Accident narrative

    Telehandler operator picked up a bundle of 20' x 6" c-channel. The c-channel began to slide from the end of the forks toward the mass of the telehandler. The IE, who was near the telehandler, attempted to prevent the channel from sliding back on the forks resulting in a laceration that required 5 stitches to close a wound on EE's middle finger.

  19. Regular Safety and Health Inspection

    inspectionRecord F007335

    78.8 on-site hours reported

  20. Safety defects; examination, correction and records.

    violationRecord 9545982

    30 CFR 57.14100(a) · $151.00 proposed penalty

  21. Safety defects; examination, correction and records.

    violationRecord 9545981

    30 CFR 56.14100(b) · $151.00 proposed penalty

  22. Insulation and fittings for power wires and cables.

    violationRecord 9545980

    30 CFR 56.12008 · $151.00 proposed penalty

  23. Insulation and fittings for power wires and cables.

    violationRecord 9545979

    30 CFR 56.12008 · $151.00 proposed penalty

  24. Safety defects; examination, correction and records.

    violationRecord 9545978

    30 CFR 57.14100(c) · $151.00 proposed penalty

  25. Protection of persons at switchgear.

    violationRecord 9545977

    30 CFR 56.12020 · $151.00 proposed penalty

Sources and definitions

MSHA Violations (issue date), Accidents (accident date) and Inspections (begin date).

Violation titles use current CFR headings to identify the cited rule; they are not the inspector’s account of what happened.

Counts describe published rows, including contractor records; accident records are not distinct incidents or numbers of people injured.

Zero means no matching records in the imported sources, not proof of no events. Historical coverage differs by source; absence before a source begins reporting is not a zero incident rate. Invalid or absent dates and records after the snapshot are excluded.

S&S means SIG_SUB=Y. Fatality records use DEGREE_INJURY_CD=01. Proposed penalties are not final assessed or paid amounts; missing dollar values are omitted.

Inspection hours are SUM_TOTAL_ON_SITE_HOURS attributed to the inspection start date, without supervisor/trainee hours. Missing hours are omitted; a started inspection may still be open.

Portfolio totals use current mine membership, including events before the current owner or operator's tenure.