← OHIO COUNTY MINE

OHIO COUNTY MINE safety activity

MSHA violations, accident reports and inspections.

2025-01-01 – 2026-10-31Database snapshot · 2026-10-31

Safety activity

  1. Mine ventilation plan; submission and approval.

    violationRecord 5124511

    30 CFR 75.370(a)(1)

  2. Spot Inspections

    inspectionRecord F0141D9

    103(i) · 5.5 on-site hours reported

  3. Accumulation of combustible materials.

    violationRecord 5124510

    30 CFR 75.400

  4. Handling of materials

    accidentRecord 220262870013

    Days away from work only

    Accident narrative

    Individual was standing a roll of slick line up against the rib line. In the process they felt a "pop" in their shoulder. Compliance with rules/Regs, PPE, mining equip/systems not a factor. Miner proficiency may be a factor.

  5. Exploding vessels under pressure

    accidentRecord 220262870012

    Days away from work only

    Accident narrative

    Individual was hosing up a longwall shield and was removing cap at the end shield to where the shield to shield hose goes. Main shut off was off to relieve pressure but there was still some residual pressure in line forcing the cap to come off and strike individual in the face. Compliance with rules/regs PPE, mining eqip/systems not a factor. Proficiency may be a factor

  6. Identification of circuit breakers.

    violationRecord 5124509

    30 CFR 75.904

  7. Installation of high-voltage transmission cables.

    violationRecord 5124508

    30 CFR 75.807

  8. Other safeguards.

    violationRecord 5122818

    30 CFR 75.1403

  9. Handling of materials

    accidentRecord 220262810011

    Days away from work only

    Accident narrative

    Employee was setting a scoop up to charge when the battery lid slipped from the leg prop and fell, striking EE's right wrist. Compliance with rules/regs, PPE, mining equip/systems not a factor. Miner proficiency may be a factor.

  10. Spot Inspections

    inspectionRecord F0141D8

    103(i) · 5.0 on-site hours reported

  11. Non-Injury Accident Investigation

    inspectionRecord F037A4B

    2.0 on-site hours reported

  12. Impoundment Spot Inspection

    inspectionRecord 4012079

    9.8 on-site hours reported

  13. Ventilation Technical Investigation

    inspectionRecord F012B90

    43.3 on-site hours reported

  14. Fall of roof or back

    accidentRecord 220262790003

    Accident only

    Accident narrative

    A roof fall has taken place on the mainline 7 track at 43 crosscut. The fall was approximately 30 feet in length and above the anchoring point. No other part 50 criteria applies

  15. Regular Safety and Health Inspection

    inspectionRecord F0141D7

    92.8 on-site hours reported

  16. Electrical Technical Investigation

    inspectionRecord F010B39

    13.0 on-site hours reported

  17. Fall of roof or back

    accidentRecord 220262780007

    Days away from work only

    Accident narrative

    Employee was sitting on the panline while meshing the face for teardown, when EE was struck by a piece of the binder and coal that had rolled out of the face from behind the mesh, resulting in a contusion to EE's lower left leg. Compliance with rules/regs, PPE, mining equip/systems not a factor. Miner proficiency may be a factor.

  18. Spot Inspections

    inspectionRecord F01AFD6

    103(i) · 6.3 on-site hours reported

  19. Weekly examination.

    violationRecord 5120431

    30 CFR 75.364(b)(4)

  20. Health Technical Investigation

    inspectionRecord F04BC6E

    10.5 on-site hours reported

  21. Protection from falls of roof, face and ribs.

    violationRecord 8056017

    30 CFR 75.202(a) · Significant and substantial (S&S)

  22. Criteria—Belt conveyors.

    violationRecord 8056016

    30 CFR 75.1403-5(g)

  23. Accumulation of combustible materials.

    violationRecord 8056015

    30 CFR 75.400

  24. Accumulation of combustible materials.

    violationRecord 8056014

    30 CFR 75.400

  25. Spot Inspections

    inspectionRecord F01AFD5

    103(i) · 6.0 on-site hours reported

Sources and definitions

MSHA Violations (issue date), Accidents (accident date) and Inspections (begin date).

Violation titles use current CFR headings to identify the cited rule; they are not the inspector’s account of what happened.

Counts describe published rows, including contractor records; accident records are not distinct incidents or numbers of people injured.

Zero means no matching records in the imported sources, not proof of no events. Historical coverage differs by source; absence before a source begins reporting is not a zero incident rate. Invalid or absent dates and records after the snapshot are excluded.

S&S means SIG_SUB=Y. Fatality records use DEGREE_INJURY_CD=01. Proposed penalties are not final assessed or paid amounts; missing dollar values are omitted.

Inspection hours are SUM_TOTAL_ON_SITE_HOURS attributed to the inspection start date, without supervisor/trainee hours. Missing hours are omitted; a started inspection may still be open.

Portfolio totals use current mine membership, including events before the current owner or operator's tenure.