Search

← MARSHALL COUNTY MINE

MARSHALL COUNTY MINE safety activity

MSHA violations, accident reports and inspections.

2025-01-01 – 2026-10-31Database snapshot · 2026-10-31

Safety activity

  1. Non-Injury Accident Investigation

    inspectionRecord F01292C

    3.3 on-site hours reported

  2. Spot Inspections

    inspectionRecord F02C6C5

    103(i) · 7.5 on-site hours reported

  3. Power wires and cables; insulation and protection.

    violationRecord 9932817

    30 CFR 75.517 · $465.00 proposed penalty

  4. Maintenance of belt conveyors and belt conveyor entries.

    violationRecord 9932816

    30 CFR 75.1731(b) · $151.00 proposed penalty

  5. Fall of roof or back

    accidentRecord 220261940024

    Accident only

    Accident narrative

    An unplanned roof fall occurred on 7/05/2026 at 8:51am. The fall measured 16' wide by 50' long and 8' high. The fall occurred on Mainline 3 Track at 3-06 crosscut. The area was posted on all sides, dangered off, and will be cleaned up.

  6. Fall of roof or back

    accidentRecord 220261940028

    Accident only

    Accident narrative

    An unplanned roof fall occurred on 7/02/2026 at 5:55pm. The fall measured 16' wide by 45' long and 10' high. The fall occurred on Mainline 16 Track at 16-31 crosscut. The area was posted on all sides, dangered off, and will be cleaned up.

  7. Machinery

    accidentRecord 220261900025

    Days away from work only

    Accident narrative

    Employee was welding when the welder stopped working, employee raised hood and received flash burns when welder suddenly arc. Mining systems was not a factor, compliance with rules and regulations was not a factor, PPE was a factor.

  8. Regular Safety and Health Inspection

    inspectionRecord F0143F3

    873.5 on-site hours reported

  9. Non-Injury Accident Investigation

    inspectionRecord F013FD1

    7.0 on-site hours reported

  10. Machinery

    accidentRecord 220261890037

    Days away from work only

    Accident narrative

    Employee was using jack hammer when the jack hammer tip slipped off rock and landed on top of employee's right foot. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.

  11. Electrical Technical Investigation

    inspectionRecord F0136BD

    3.5 on-site hours reported

  12. Handling of materials

    accidentRecord 220261940016

    Days away from work only

    Accident narrative

    Employee was pushing bolt into bolt hole when employee felt pinch and pain in left shoulder. Employee continued to work until 07/07/2026 then sought treatment. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.

  13. Handling of materials

    accidentRecord 220261940020

    Days away from work only

    Accident narrative

    Employee was building a wall and came into contact with J-Tech pumpable crib material. Employee continued to work until 07/10/2026 and then sought treatment. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.

  14. Handling of materials

    accidentRecord 220261900022

    Days away from work only

    Accident narrative

    Employee was loading vent tubes and while turning to load another vent tube, employee felt pain in the middle of EE's back. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.

  15. Fall of roof or back

    accidentRecord 220261890012

    Accident only

    Accident narrative

    An unplanned roof fall occurred on 6/29/2026 at 7:15pm. The fall measured 16' wide by 40' long and 8' high. The fall occurred on Mainline 3 Belt at 3-32 crosscut. The area was posted on all sides, dangered off and will be cleaned up.

  16. Spot Inspections

    inspectionRecord F012A23

    103(i) · 9.5 on-site hours reported

  17. Preshift examination at fixed intervals.

    violationRecord 5122466

    30 CFR 75.360(b)(11)(iv) · Significant and substantial (S&S) · $1,550.00 proposed penalty

  18. Ventilation controls.

    violationRecord 5122465

    30 CFR 75.333(h) · $209.00 proposed penalty

  19. Protection from falls of roof, face and ribs.

    violationRecord 5122464

    30 CFR 75.202(a) · $226.00 proposed penalty

  20. Condition and examination of firefighting equipment.

    violationRecord 5122463

    30 CFR 75.1100-3 · $151.00 proposed penalty

  21. Criteria—Belt conveyors.

    violationRecord 5122462

    30 CFR 75.1403-5(g) · $366.00 proposed penalty

  22. Accumulation of combustible materials.

    violationRecord 5122461

    30 CFR 75.400 · Significant and substantial (S&S) · $1,818.00 proposed penalty

  23. Criteria—Belt conveyors.

    violationRecord 5122460

    30 CFR 75.1403-5(j) · $313.00 proposed penalty

  24. Preshift examination at fixed intervals.

    violationRecord 9126137

    30 CFR 75.360(b)(11)(iv) · Significant and substantial (S&S) · $24,126.00 proposed penalty

  25. Protection from falls of roof, face and ribs.

    violationRecord 9126136

    30 CFR 75.202(a) · $504.00 proposed penalty

Sources and definitions

MSHA Violations (issue date), Accidents (accident date) and Inspections (begin date).

Violation titles use current CFR headings to identify the cited rule; they are not the inspector’s account of what happened.

Counts describe published rows, including contractor records; accident records are not distinct incidents or numbers of people injured.

Zero means no matching records in the imported sources, not proof of no events. Historical coverage differs by source; absence before a source begins reporting is not a zero incident rate. Invalid or absent dates and records after the snapshot are excluded.

S&S means SIG_SUB=Y. Fatality records use DEGREE_INJURY_CD=01. Proposed penalties are not final assessed or paid amounts; missing dollar values are omitted.

Inspection hours are SUM_TOTAL_ON_SITE_HOURS attributed to the inspection start date, without supervisor/trainee hours. Missing hours are omitted; a started inspection may still be open.

Portfolio totals use current mine membership, including events before the current owner or operator's tenure.