← Logan Surface Mine

Logan Surface Mine safety activity

MSHA violations, accident reports and inspections.

2025-01-01 – 2026-10-28Database snapshot · 2026-10-28

Safety activity

  1. Spot Inspection

    inspectionRecord F0388F4

    9.5 on-site hours reported

  2. Mobile equipment; automatic warning devices.

    violationRecord 5078154

    30 CFR 77.410(a) · $151.00 proposed penalty

  3. Loading and haulage equipment; inspection and maintenance.

    violationRecord 5078153

    30 CFR 77.1606(c) · $151.00 proposed penalty

  4. Regular Safety and Health Inspection

    inspectionRecord F0388EE

    42.0 on-site hours reported

  5. Handling of materials

    accidentRecord 220261950022

    No dys awy frm wrk,no rstr act

    Accident narrative

    While changing the trip rope on 7450 dragline, employee was feeding the end of the cable back into the block when EE lost grip causing it to swing back at EE and strike EE just above EE's left eye at EE's eyebrow. EE received a laceration and required 3 stitches.

  6. Compliance Follow-up Inspection

    inspectionRecord F02B0E9

    0.0 on-site hours reported

  7. Quarterly sampling; designated work positions.

    violationRecord 5154610

    30 CFR 71.206(a) · $151.00 proposed penalty

  8. Quarterly sampling; designated work positions.

    violationRecord 5154609

    30 CFR 71.206(a) · $151.00 proposed penalty

  9. Spot Inspection

    inspectionRecord F0183F8

    10.0 on-site hours reported

  10. Quarterly sampling; designated work positions.

    violationRecord 9606286

    30 CFR 71.206(a) · $151.00 proposed penalty

  11. Examination and maintenance of firefighting equipment.

    violationRecord 9606169

    30 CFR 77.1110 · $151.00 proposed penalty

  12. Regular Safety and Health Inspection

    inspectionRecord F0183EC

    37.0 on-site hours reported

  13. 103 (g) Written Notification Hazard Complaint Inspectio

    inspectionRecord F0183E9

    7.0 on-site hours reported

  14. Handling of materials

    accidentRecord 220253170125

    Dys awy frm wrk & restrctd act

    Accident narrative

    Employees were replacing protective wing shroud on the left side of the bucket on the 6020 excavator. While attempting to put the shroud in place, the shroud dropped unexpectedly pinching EE's fingers between the shroud and edge of the bucket. The shroud weighing approximately 40 pounds fell 10 inches before striking the employee's left 3rd finger causing fracture and laceration.

  15. Spot Inspection

    inspectionRecord F006FAA

    10.5 on-site hours reported

  16. Spot Inspection

    inspectionRecord F0055FB

    5.0 on-site hours reported

  17. Machinery

    accidentRecord 220251900018

    Dys awy frm wrk & restrctd act

    Accident narrative

    Had left hand resting on the steel side of the rock picking table when an approximately 200lb rock fell down from the feeder striking employee's hand. No initial treatment needed. Later, numbness developed and recommended surgery. Did not have knowledge of this until 7/8/25.

  18. Loading and haulage equipment; installations.

    violationRecord 9604080

    30 CFR 77.1605(k) · Significant and substantial (S&S) · $1,219.00 proposed penalty

  19. Regular Safety and Health Inspection

    inspectionRecord F0055F1

    64.5 on-site hours reported

Sources and definitions

MSHA Violations (issue date), Accidents (accident date) and Inspections (begin date).

Violation titles use current CFR headings to identify the cited rule; they are not the inspector’s account of what happened.

Counts describe published rows, including contractor records; accident records are not distinct incidents or numbers of people injured.

Zero means no matching records in the imported sources, not proof of no events. Historical coverage differs by source; absence before a source begins reporting is not a zero incident rate. Invalid or absent dates and records after the snapshot are excluded.

S&S means SIG_SUB=Y. Fatality records use DEGREE_INJURY_CD=01. Proposed penalties are not final assessed or paid amounts; missing dollar values are omitted.

Inspection hours are SUM_TOTAL_ON_SITE_HOURS attributed to the inspection start date, without supervisor/trainee hours. Missing hours are omitted; a started inspection may still be open.

Portfolio totals use current mine membership, including events before the current owner or operator's tenure.