Laurel Fork Mine safety activity
MSHA violations, accident reports and inspections.
Safety activity
Verbal Hazard Complaint Inspections
0.0 on-site hours reported
Spot Inspections
103(i) · 8.5 on-site hours reported
Permissible electric face equipment; maintenance.
30 CFR 75.503 · Significant and substantial (S&S)
Electric face equipment; deenergization.
30 CFR 75.523
Preshift examination at fixed intervals.
30 CFR 75.360(b)(11)(iii)
Accumulation of combustible materials.
30 CFR 75.400
Ventilation controls.
30 CFR 75.333(d)(2)
Mine ventilation plan; submission and approval.
30 CFR 75.370(a)(1)
Escapeways; bituminous and lignite mines.
30 CFR 75.380(d)(7)(vi)
Accumulation of combustible materials.
30 CFR 75.400
Mechanical equipment guards.
30 CFR 75.1722(a) · Significant and substantial (S&S)
Ventilation controls.
30 CFR 75.333(d)(3)
Ventilation controls.
30 CFR 75.333(h)
Low- and medium-voltage circuits serving three-phase alternating current equipment; circuit breakers.
30 CFR 75.900 · Significant and substantial (S&S)
Ventilation controls.
30 CFR 75.333(h)
Other safeguards.
30 CFR 75.1403 · Significant and substantial (S&S)
Low- and medium-voltage ground check monitor circuits.
30 CFR 75.902
Low- and medium-voltage ground check monitor circuits.
30 CFR 75.902
Non-Injury Accident Investigation
12.3 on-site hours reported
Protection from falls of roof, face and ribs.
30 CFR 75.202(a) · Significant and substantial (S&S)
Violation — cited standard not reported
Maintenance of belt conveyors and belt conveyor entries.
30 CFR 75.1731(a)
Accumulation of combustible materials.
30 CFR 75.400
Machinery and equipment; operation and maintenance.
30 CFR 75.1725(a) · Significant and substantial (S&S)
Preshift examination at fixed intervals.
30 CFR 75.360(f)
Sources and definitions
MSHA Violations (issue date), Accidents (accident date) and Inspections (begin date).
Violation titles use current CFR headings to identify the cited rule; they are not the inspector’s account of what happened.
Counts describe published rows, including contractor records; accident records are not distinct incidents or numbers of people injured.
Zero means no matching records in the imported sources, not proof of no events. Historical coverage differs by source; absence before a source begins reporting is not a zero incident rate. Invalid or absent dates and records after the snapshot are excluded.
S&S means SIG_SUB=Y. Fatality records use DEGREE_INJURY_CD=01. Proposed penalties are not final assessed or paid amounts; missing dollar values are omitted.
Inspection hours are SUM_TOTAL_ON_SITE_HOURS attributed to the inspection start date, without supervisor/trainee hours. Missing hours are omitted; a started inspection may still be open.
Portfolio totals use current mine membership, including events before the current owner or operator's tenure.