HM Southeast Cement safety activity
MSHA violations, accident reports and inspections.
Safety activity
Housekeeping.
30 CFR 56.20003(b) · $398.00 proposed penalty
Handtools (nonpowered)
No dys awy frm wrk,no rstr act
Accident narrative
While attempting to remove a seized bearing from a shaft, the employee struck the bearing with a hammer. Upon impact, a chip from the bearing struck the employee under their safety glasses.
Regular Safety and Health Inspection
70.8 on-site hours reported
Inspection and cover plates.
30 CFR 56.12032 · $4,383.00 proposed penalty
Electrical conductors.
30 CFR 56.12004 · $959.00 proposed penalty
Construction and maintenance of guards.
30 CFR 56.14112(b) · $1,968.00 proposed penalty
Roll-over protective structures (ROPS) and seat belts.
30 CFR 56.14130(g) · $398.00 proposed penalty
Slip or fall of person
Days restricted activity only
Accident narrative
The employee was working on the platform level of 471-BF-07. EE was raising cages by a rope to the upper section of the dust collector. EE looked up to communicate with the another employee. EE stepped backwards while continuing to look up and tripped over an empty box. When the employee braced EE's fall with EE's hands causing the injury to EE's right wrist.
Fire
Accident only
Accident narrative
A fire was observed at the northeast corner of the clinker cooler. Oil that leaked from the hydraulic system was ignited by hot material (approximately 1500F) that came from an undetected hole in the wall of the clinker cooler
Handling of materials
Dys awy frm wrk & restrctd act
Accident narrative
The employee was entering the production utility shed outside of the administration building. When EE attempted to open the door the hinge failed and the door struck EE in the head causing a laceration.
Machinery
Days restricted activity only
Accident narrative
The employee was changing a unplugged drill bit. EE was using EEs hands to loosen and tighten the drill bit in place. EE could not get a sufficient grip on the drill due to wearing gloves that had oil/grease on them as did the drill. EE removed EEs gloves to attempt to improve EEs grip. EEs hand slipped while tightening the drill and struck the tip of the bit causing a laceration.
Slip or fall of person
Days away from work only
Accident narrative
The employee was walking down the stairs at 1st bank silos when EE slipped on a piece of clinker causing EE to land EE's right foot awkwardly on the next step. On 03/05/2026 EE was issued light duty restrictions.
Compliance Follow-up Inspection
2.5 on-site hours reported
Safety belts and lines.
30 CFR 56.15005 · Significant and substantial (S&S) · $818.00 proposed penalty
Housekeeping.
30 CFR 56.20003(b) · $398.00 proposed penalty
Inspection and cover plates.
30 CFR 56.12032 · $4,383.00 proposed penalty
Electrical conductors.
30 CFR 56.12004 · $883.00 proposed penalty
Brakes.
30 CFR 56.14101(a)(2) · $165.00 proposed penalty
Safety defects; examination, correction and records.
30 CFR 56.14100(a) · Significant and substantial (S&S) · $3,184.00 proposed penalty
Brakes.
30 CFR 56.14101(a)(2) · $642.00 proposed penalty
Closure of valves.
30 CFR 56.4603 · $642.00 proposed penalty
Parking procedures for unattended equipment.
30 CFR 56.14207 · $642.00 proposed penalty
Electrical conductors.
30 CFR 56.12004 · $5,144.00 proposed penalty
Brakes.
30 CFR 56.14101(a)(2) · $2,133.00 proposed penalty
Safe access.
30 CFR 56.11001 · Significant and substantial (S&S) · $818.00 proposed penalty
Sources and definitions
MSHA Violations (issue date), Accidents (accident date) and Inspections (begin date).
Violation titles use current CFR headings to identify the cited rule; they are not the inspector’s account of what happened.
Counts describe published rows, including contractor records; accident records are not distinct incidents or numbers of people injured.
Zero means no matching records in the imported sources, not proof of no events. Historical coverage differs by source; absence before a source begins reporting is not a zero incident rate. Invalid or absent dates and records after the snapshot are excluded.
S&S means SIG_SUB=Y. Fatality records use DEGREE_INJURY_CD=01. Proposed penalties are not final assessed or paid amounts; missing dollar values are omitted.
Inspection hours are SUM_TOTAL_ON_SITE_HOURS attributed to the inspection start date, without supervisor/trainee hours. Missing hours are omitted; a started inspection may still be open.
Portfolio totals use current mine membership, including events before the current owner or operator's tenure.