Hances Ridge Split #1 safety activity
MSHA violations, accident reports and inspections.
Safety activity
Spot Inspection
1.5 on-site hours reported
Shovels, draglines, and tractors.
30 CFR 77.409(a)
Mobile equipment; automatic warning devices.
30 CFR 77.410(b)
Other
Injuries due to natural causes
Accident narrative
Employee had a seizure and the dozer went over a slope
Non-Fatal Accident Investigation
39.0 on-site hours reported
Violation — cited standard not reported
Spot Inspection
7.8 on-site hours reported
Protection of trailing cables.
30 CFR 77.604 · $151.00 proposed penalty
Loading and haulage equipment; installations.
30 CFR 77.1605(d) · $151.00 proposed penalty
Loading and haulage equipment; installations.
30 CFR 77.1605(d) · $151.00 proposed penalty
Regular Safety and Health Inspection
78.3 on-site hours reported
Storage of materials.
30 CFR 77.208(e) · $151.00 proposed penalty
Spot Inspection
6.0 on-site hours reported
Spot Inspection
3.0 on-site hours reported
Verbal Hazard Complaint Inspections
8.0 on-site hours reported
Spot Inspection
6.0 on-site hours reported
Spot Inspection
13.5 on-site hours reported
Verbal Hazard Complaint Inspections
0.0 on-site hours reported
Handling of materials
No dys awy frm wrk,no rstr act
Accident narrative
Pulling anchor pin out on the highwall and the pin twisted and mashed finger against the frame of the miner requiring 7 stitches
Handling of materials
Days away from work only
Accident narrative
working on discharge line for a diesel pump and hurt lower back while trying to get ice out of the discharge line
Bathing facilities; change rooms; sanitary flush toilet facilities.
30 CFR 71.400 · $151.00 proposed penalty
Loading and haulage equipment; operation.
30 CFR 77.1607(b) · $151.00 proposed penalty
Travelways at surface installations.
30 CFR 77.205(a) · $151.00 proposed penalty
Travelways at surface installations.
30 CFR 77.205(b) · $151.00 proposed penalty
Mechanical equipment guards.
30 CFR 77.400(a) · $151.00 proposed penalty
Sources and definitions
MSHA Violations (issue date), Accidents (accident date) and Inspections (begin date).
Violation titles use current CFR headings to identify the cited rule; they are not the inspector’s account of what happened.
Counts describe published rows, including contractor records; accident records are not distinct incidents or numbers of people injured.
Zero means no matching records in the imported sources, not proof of no events. Historical coverage differs by source; absence before a source begins reporting is not a zero incident rate. Invalid or absent dates and records after the snapshot are excluded.
S&S means SIG_SUB=Y. Fatality records use DEGREE_INJURY_CD=01. Proposed penalties are not final assessed or paid amounts; missing dollar values are omitted.
Inspection hours are SUM_TOTAL_ON_SITE_HOURS attributed to the inspection start date, without supervisor/trainee hours. Missing hours are omitted; a started inspection may still be open.
Portfolio totals use current mine membership, including events before the current owner or operator's tenure.