Cumberland Mine safety activity
MSHA violations, accident reports and inspections.
Safety activity
Accumulation of combustible materials.
30 CFR 75.400
Escapeways; bituminous and lignite mines.
30 CFR 75.380(d)(7)(iv)
Cable fittings; suitability.
30 CFR 75.515
Criteria—Haulage; general.
30 CFR 75.1403-10(i)
Mine ventilation plan; submission and approval.
30 CFR 75.370(a)(1)
Permissible exposure level.
30 CFR 62.130(a) · Significant and substantial (S&S)
Inspection and cover plates.
30 CFR 77.512
Examination and maintenance of firefighting equipment.
30 CFR 77.1110
Identification of circuit breakers.
30 CFR 77.904
Fall of roof or back
Accident only
Accident narrative
A unintentional roof fall was discovered along the 4-left seal area between 2 an 3 seal. The fall was 40ft(L)x 16ft(W)x 10ft (H). Area was dangered off.
Spot Inspections
103(i) · 6.0 on-site hours reported
Health Technical Investigation
9.8 on-site hours reported
Auxiliary fans and tubing.
30 CFR 75.331(a)(4)
Mine ventilation plan; submission and approval.
30 CFR 75.370(a)(1)
Face ventilation control devices.
30 CFR 75.330(b)(2)
Roof control plan.
30 CFR 75.220(a)(1)
Roof control plan.
30 CFR 75.220(a)(1)
Verbal Hazard Complaint Inspections
5.0 on-site hours reported
Verbal Hazard Complaint Inspections
3.0 on-site hours reported
Additional self-contained self-rescuers (SCSRs).
30 CFR 75.1714-4(e)
Escapeways; bituminous and lignite mines.
30 CFR 75.380(d)(7)(vii)
Ventilation controls.
30 CFR 75.333(h)
Spot Inspections
103(i) · 8.0 on-site hours reported
Verbal Hazard Complaint Inspections
9.5 on-site hours reported
Accumulation of combustible materials.
30 CFR 75.400
Sources and definitions
MSHA Violations (issue date), Accidents (accident date) and Inspections (begin date).
Violation titles use current CFR headings to identify the cited rule; they are not the inspector’s account of what happened.
Counts describe published rows, including contractor records; accident records are not distinct incidents or numbers of people injured.
Zero means no matching records in the imported sources, not proof of no events. Historical coverage differs by source; absence before a source begins reporting is not a zero incident rate. Invalid or absent dates and records after the snapshot are excluded.
S&S means SIG_SUB=Y. Fatality records use DEGREE_INJURY_CD=01. Proposed penalties are not final assessed or paid amounts; missing dollar values are omitted.
Inspection hours are SUM_TOTAL_ON_SITE_HOURS attributed to the inspection start date, without supervisor/trainee hours. Missing hours are omitted; a started inspection may still be open.
Portfolio totals use current mine membership, including events before the current owner or operator's tenure.