Bailey Mine safety activity
MSHA violations, accident reports and inspections.
Safety activity
Accumulation of combustible materials.
30 CFR 75.400 · $151.00 proposed penalty
Cable fittings; suitability.
30 CFR 77.505 · $151.00 proposed penalty
Fire suppression systems for permanent underground diesel fuel storage facilities.
30 CFR 75.1912(h) · $151.00 proposed penalty
Ventilation controls.
30 CFR 75.333(h) · $151.00 proposed penalty
Slip or fall of person
Days away from work only
Accident narrative
A Bailey Prep Plant employee was in the process of installing new CMI belts. As EE stood on a working platform, the anchorage points of the platform failed allowing the employee to fall down the A1, A2 lean coal chute. In the process of falling down the employee struck EE's right knee against the opposing platform, causing a laceration below EE's right knee cap.
Fall of roof or back
Accident only
Accident narrative
An unintentional roof fall occurred between 71 and 72 x-cut in the number 2 entry of 4 South. This area is not an active area and is the travelway for a weekly exam. This area was previously supported with floor to roof supports in the form of turbo props. Adverse geological conditions due to horizontal stress and age of this previously mined area contributed to the deterioration.
Non-Injury Accident Investigation
10.5 on-site hours reported
Violation — cited standard not reported
Methane monitors.
30 CFR 75.342(a)(4) · $151.00 proposed penalty
Electric equipment; examination, testing and maintenance.
30 CFR 75.512 · $226.00 proposed penalty
Machinery and equipment; operation and maintenance.
30 CFR 75.1725(a) · $193.00 proposed penalty
Quarterly sampling; mechanized mining units.
30 CFR 70.208(a)(2) · Significant and substantial (S&S) · $6,037.00 proposed penalty
Quarterly sampling; mechanized mining units.
30 CFR 70.208(a)(2) · Significant and substantial (S&S) · $4,749.00 proposed penalty
Machinery
Dys awy frm wrk & restrctd act
Accident narrative
EE was cutting a 2'x6'x10' piece of wood in half. EE was cutting with a circular saw. EE's co-worker was holding onto one side of board while EE was holding other side. EE had almost cut completely through the wood. The board dropped and EE's left hand slid forward into the running saw blade. EE has lacerations middle and ring finger and EE severed EE's pinky finger.
Regular Safety and Health Inspection
1,594.8 on-site hours reported
Spot Inspections
103(i) · 5.5 on-site hours reported
Spot Inspections
103(i) · 7.5 on-site hours reported
Spot Inspections
103(i) · 5.0 on-site hours reported
Preparation and submission of MSHA Report Form 7000-1—Mine Accident, Injury, and Illness Report.
30 CFR 50.20(a) · $151.00 proposed penalty
Slip or fall of person
Days away from work only
Accident narrative
Employee was operating the headgate side of the longwall shearer. As they were cutting to the tailgate, the employee tripped. They struck their right calf off of the toes of the shields when they landed on the ground.
Verbal Hazard Complaint Inspections
4.0 on-site hours reported
Protection from falls of roof, face and ribs.
30 CFR 75.202(a) · Significant and substantial (S&S) · $1,550.00 proposed penalty
Travelways at surface installations.
30 CFR 77.205(e) · $193.00 proposed penalty
Spot Inspections
103(i) · 6.5 on-site hours reported
Ventilation controls.
30 CFR 75.333(h) · $151.00 proposed penalty
Sources and definitions
MSHA Violations (issue date), Accidents (accident date) and Inspections (begin date).
Violation titles use current CFR headings to identify the cited rule; they are not the inspector’s account of what happened.
Counts describe published rows, including contractor records; accident records are not distinct incidents or numbers of people injured.
Zero means no matching records in the imported sources, not proof of no events. Historical coverage differs by source; absence before a source begins reporting is not a zero incident rate. Invalid or absent dates and records after the snapshot are excluded.
S&S means SIG_SUB=Y. Fatality records use DEGREE_INJURY_CD=01. Proposed penalties are not final assessed or paid amounts; missing dollar values are omitted.
Inspection hours are SUM_TOTAL_ON_SITE_HOURS attributed to the inspection start date, without supervisor/trainee hours. Missing hours are omitted; a started inspection may still be open.
Portfolio totals use current mine membership, including events before the current owner or operator's tenure.