← Bailey Mine

Bailey Mine safety activity

MSHA violations, accident reports and inspections.

2025-01-01 – 2026-10-31Database snapshot · 2026-10-31

Safety activity

  1. Dry chemical devices; capacity; minimum requirements.

    violationRecord 9605576

    30 CFR 75.1107-9(a)(1) · $151.00 proposed penalty

  2. Accumulation of combustible materials.

    violationRecord 9604670

    30 CFR 75.400 · $336.00 proposed penalty

  3. Other safeguards.

    violationRecord 9604669

    30 CFR 75.1403 · $1,431.00 proposed penalty

  4. Mine ventilation plan; submission and approval.

    violationRecord 9604668

    30 CFR 75.370(a)(1) · $193.00 proposed penalty

  5. Maintenance of belt conveyors and belt conveyor entries.

    violationRecord 9603233

    30 CFR 75.1731(b) · $151.00 proposed penalty

  6. Electric equipment; examination, testing and maintenance.

    violationRecord 9602148

    30 CFR 75.512 · $151.00 proposed penalty

  7. Accumulation of combustible materials.

    violationRecord 9602147

    30 CFR 75.400 · $151.00 proposed penalty

  8. Protection of trailing cables.

    violationRecord 9602146

    30 CFR 75.606 · $151.00 proposed penalty

  9. Automatic fire sensor and warning device systems; installation; minimum requirements.

    violationRecord 9602145

    30 CFR 75.1103-4(b) · $193.00 proposed penalty

  10. Ventilation controls.

    violationRecord 9602144

    30 CFR 75.333(e)(1)(ii) · $193.00 proposed penalty

  11. Other safeguards.

    violationRecord 9602143

    30 CFR 75.1403 · $288.00 proposed penalty

  12. Mine ventilation plan; submission and approval.

    violationRecord 9602142

    30 CFR 75.370(a)(1) · $151.00 proposed penalty

  13. Daily examination of hoisting equipment.

    violationRecord 9602043

    30 CFR 75.1400-3(b)(3) · $193.00 proposed penalty

  14. Other safeguards.

    violationRecord 9607661

    30 CFR 75.1403 · $592.00 proposed penalty

  15. Other safeguards.

    violationRecord 9605621

    30 CFR 75.1403 · $151.00 proposed penalty

  16. Electric equipment; examination, testing and maintenance.

    violationRecord 9605575

    30 CFR 75.512 · $151.00 proposed penalty

  17. Other safeguards.

    violationRecord 9604667

    30 CFR 75.1403 · $1,431.00 proposed penalty

  18. Fall of roof or back

    accidentRecord 220252030020

    Accident only

    Accident narrative

    An unintentional roof fall occurred in the 14L miner section. This was located in the #2 belt entry between #1 and the #2 crosscut. The fall measured approximately 65ft long 16ft wide and 20ft high. The fall occurred as a result of faulted area due to horizontal stress that occurred causing the strata to separate. No injury or equipment damage as a result of this incident.

  19. Spot Inspections

    inspectionRecord F00E92D

    103(i) · 2.0 on-site hours reported

  20. Non-Injury Accident Investigation

    inspectionRecord F00E92C

    15.0 on-site hours reported

  21. Mechanical equipment guards.

    violationRecord 9605620

    30 CFR 75.1722(a) · $288.00 proposed penalty

  22. Protection of trailing cables.

    violationRecord 9605619

    30 CFR 75.606 · $151.00 proposed penalty

  23. Short circuit protection; ratings and settings of circuit breakers.

    violationRecord 9605618

    30 CFR 75.601-1 · $151.00 proposed penalty

  24. Roof control plan.

    violationRecord 9605617

    30 CFR 75.220(a)(1) · $151.00 proposed penalty

  25. Accumulation of combustible materials.

    violationRecord 9605616

    30 CFR 75.400 · $151.00 proposed penalty

Sources and definitions

MSHA Violations (issue date), Accidents (accident date) and Inspections (begin date).

Violation titles use current CFR headings to identify the cited rule; they are not the inspector’s account of what happened.

Counts describe published rows, including contractor records; accident records are not distinct incidents or numbers of people injured.

Zero means no matching records in the imported sources, not proof of no events. Historical coverage differs by source; absence before a source begins reporting is not a zero incident rate. Invalid or absent dates and records after the snapshot are excluded.

S&S means SIG_SUB=Y. Fatality records use DEGREE_INJURY_CD=01. Proposed penalties are not final assessed or paid amounts; missing dollar values are omitted.

Inspection hours are SUM_TOTAL_ON_SITE_HOURS attributed to the inspection start date, without supervisor/trainee hours. Missing hours are omitted; a started inspection may still be open.

Portfolio totals use current mine membership, including events before the current owner or operator's tenure.