AFFINITY MINE safety activity
MSHA violations, accident reports and inspections.
Safety activity
Handtools (nonpowered)
Days away from work only
Accident narrative
The employee was in the #9 entry on the # 3 section. EE was scaling the mine roof when a rock measuring 3 inches thick by 34 inches wide by 16 inches long fell striking them on the right boot. The area was approximately 6 feet high and damp. the employee suffered a fracture to a small bone on the side of the right foot just below the ankle.
Spot Inspections
103(i) · 9.5 on-site hours reported
Escapeways; bituminous and lignite mines.
30 CFR 75.380(d)(1) · $151.00 proposed penalty
Machinery
Days away from work only
Accident narrative
The employee was bolting in the 6 left entry after installing EE's outside bolt a rock measuring 36'' Long by 32 inches wide, and approximately 2 inches thick fell striking the employee on EE's hip and lower left leg. The area was approx. 6 ft high and damp. The employee has a fracture above EE's left ankle and a spine compression fracture.
Spot Inspections
103(i) · 7.0 on-site hours reported
Roof control plan.
30 CFR 75.220(a)(1) · Significant and substantial (S&S) · $2,503.00 proposed penalty
Violation — cited standard not reported
$252.00 proposed penalty
Dust disease of lungs
Occupatnal illness not deg 1-6
Accident narrative
Employee was awarded additional 15 percent Op claim
Mine ventilation plan; submission and approval.
30 CFR 75.370(a)(1) · $151.00 proposed penalty
Mine ventilation plan; submission and approval.
30 CFR 75.370(a)(1) · $151.00 proposed penalty
Spot Inspections
103(i) · 7.5 on-site hours reported
Drill dust control at underground areas of underground mines.
30 CFR 72.630(b) · $151.00 proposed penalty
Maintenance of belt conveyors and belt conveyor entries.
30 CFR 75.1731(a) · $151.00 proposed penalty
Verbal Hazard Complaint Inspections
3.0 on-site hours reported
Travelways at surface installations.
30 CFR 77.205(b) · $151.00 proposed penalty
Power wires and cables; insulation and protection.
30 CFR 75.517 · Significant and substantial (S&S) · $2,312.00 proposed penalty
Quantity and location of firefighting equipment.
30 CFR 75.1100-2(f) · $151.00 proposed penalty
Machinery
No dys awy frm wrk,no rstr act
Accident narrative
The employee was in the #4 entry at 2 brk on 7 B belt. The employee used a grinder to try and cut a piece of synthetic sheave rope. the grinding wheel kicked back causing a 2-inch laceration to the employees left hand between the thumb and pointer finger. the area was approx. 5 feet high and dry. the employee received 5 sutures.
Spot Inspections
103(i) · 5.5 on-site hours reported
Maintenance of incombustible content of rock dust.
30 CFR 75.403 · $151.00 proposed penalty
Atmospheric monitoring systems.
30 CFR 75.351(n)(3)(i) · $151.00 proposed penalty
Mechanical equipment guards.
30 CFR 75.1722(a) · $177.00 proposed penalty
Automatic fire warning devices; actions and response.
30 CFR 75.1103-5(a)(1) · $151.00 proposed penalty
Other safeguards.
30 CFR 75.1403 · $151.00 proposed penalty
Roof control plan.
30 CFR 75.220(a)(1) · $151.00 proposed penalty
Sources and definitions
MSHA Violations (issue date), Accidents (accident date) and Inspections (begin date).
Violation titles use current CFR headings to identify the cited rule; they are not the inspector’s account of what happened.
Counts describe published rows, including contractor records; accident records are not distinct incidents or numbers of people injured.
Zero means no matching records in the imported sources, not proof of no events. Historical coverage differs by source; absence before a source begins reporting is not a zero incident rate. Invalid or absent dates and records after the snapshot are excluded.
S&S means SIG_SUB=Y. Fatality records use DEGREE_INJURY_CD=01. Proposed penalties are not final assessed or paid amounts; missing dollar values are omitted.
Inspection hours are SUM_TOTAL_ON_SITE_HOURS attributed to the inspection start date, without supervisor/trainee hours. Missing hours are omitted; a started inspection may still be open.
Portfolio totals use current mine membership, including events before the current owner or operator's tenure.