Joseph G Bucci safety activity
MSHA violations, accident reports and inspections across the current mine portfolio.
Safety activity
Ventilation plan.
Hampton Corners Mine and Retsof Bagging · 300325530 CFR 57.8520
Construction and maintenance of ventilation doors.
Hampton Corners Mine and Retsof Bagging · 300325530 CFR 57.8531(d)
Compliance Follow-up Inspection
Hampton Corners Mine and Retsof Bagging · 300325527.8 on-site hours reported
Ventilation Technical Investigation
Hampton Corners Mine and Retsof Bagging · 300325519.3 on-site hours reported
Insulation and fittings for power wires and cables.
Hampton Corners Mine and Retsof Bagging · 300325530 CFR 57.12008 · Significant and substantial (S&S)
Electrical conductors.
Hampton Corners Mine and Retsof Bagging · 300325530 CFR 57.12004
Safety defects; examination, correction and records.
Hampton Corners Mine and Retsof Bagging · 300325530 CFR 57.14100(b)
Safety defects; examination, correction and records.
Hampton Corners Mine and Retsof Bagging · 300325530 CFR 57.14100(b)
Auxiliary fan systems.
Hampton Corners Mine and Retsof Bagging · 300325530 CFR 57.8529
Safety defects; examination, correction and records.
Hampton Corners Mine and Retsof Bagging · 300325530 CFR 57.14100(b)
Storage of flammable liquids underground.
Hampton Corners Mine and Retsof Bagging · 300325530 CFR 57.4460(a)(1)
Machinery, equipment, and tools.
Hampton Corners Mine and Retsof Bagging · 300325530 CFR 57.14205
Correction of hazardous conditions.
Hampton Corners Mine and Retsof Bagging · 300325530 CFR 57.3200
Correction of hazardous conditions.
Hampton Corners Mine and Retsof Bagging · 300325530 CFR 57.3200 · Significant and substantial (S&S)
Safe access.
Hampton Corners Mine and Retsof Bagging · 300325530 CFR 57.11001 · Significant and substantial (S&S)
Horns and backup alarms for surface equipment.
Hampton Corners Mine and Retsof Bagging · 300325530 CFR 57.14132(a)
Regular Safety and Health Inspection
Hampton Corners Mine and Retsof Bagging · 3003255100.5 on-site hours reported
Limit on exposure to diesel particulate matter.
Hampton Corners Mine and Retsof Bagging · 300325530 CFR 57.5060(d) · Significant and substantial (S&S)
Inspection.
Hampton Corners Mine and Retsof Bagging · 300325530 CFR 57.4201(a)(1)
Machinery, equipment, and tools.
Hampton Corners Mine and Retsof Bagging · 300325530 CFR 57.14205 · Significant and substantial (S&S)
Limit on exposure to diesel particulate matter.
Hampton Corners Mine and Retsof Bagging · 300325530 CFR 57.5060(b)(3)
103 (g) Written Notification Hazard Complaint Inspectio
Hampton Corners Mine and Retsof Bagging · 30032556.0 on-site hours reported
Hoisting
Hampton Corners Mine and Retsof Bagging · 3003255Accident only
Accident narrative
The east brake on the Production Hoist was recirculating all oil to the tank. Valve V 10 was not closing. Replaced the valve and found a lot of rubber shavings in port holes leading into the valve. Flushed out port holes and installed valve. Everything tested good.
Verbal Hazard Complaint Inspections
Hampton Corners Mine and Retsof Bagging · 300325510.5 on-site hours reported
Verbal Hazard Complaint Inspections
Hampton Corners Mine and Retsof Bagging · 30032554.5 on-site hours reported
Sources and definitions
MSHA Violations (issue date), Accidents (accident date) and Inspections (begin date).
Violation titles use current CFR headings to identify the cited rule; they are not the inspector’s account of what happened.
Status is from the current MSHA Mines snapshot, not the selected reporting period. Closed records can retain their last reported controller/operator.
Counts describe published rows, including contractor records; accident records are not distinct incidents or numbers of people injured.
Zero means no matching records in the imported sources, not proof of no events. Historical coverage differs by source; absence before a source begins reporting is not a zero incident rate. Invalid or absent dates and records after the snapshot are excluded.
S&S means SIG_SUB=Y. Fatality records use DEGREE_INJURY_CD=01. Proposed penalties are not final assessed or paid amounts; missing dollar values are omitted.
Inspection hours are SUM_TOTAL_ON_SITE_HOURS attributed to the inspection start date, without supervisor/trainee hours. Missing hours are omitted; a started inspection may still be open.
Portfolio totals use current mine membership, including events before the current owner or operator's tenure.