Iron Oak Energy Solutions LLC safety activity

A articulated haul truck was dumping a load of fill material when the bed the chain connectors for the bed tailgate snapped off leaving the gate closed. The operator was unaware that the load was not dumping and continued to raise the bed. This caused the weight of the load to shift onto the back of the truck resulting in the cab lifting up and rolling onto its passenger side.

Following completion of welding activities on the bucket elevator structure, a fire was detected. The conveyor belt located inside the bucket elevator was observed to have ignited after the 30 minute post work inspection.

A mechanic was tasked with replacing digging teeth on an excavator. When the mechanic was picking up one of the teeth it slipped and caught EE's left small finger causing a fracture. The mechanic continued to work. While using a soft face sledge hammer to remove a tooth a shard of metal became airborne and struck the mechanic in the groin causing a laceration.

While walking on 08/12/2026 an employee got a foot stuck in mud. While pulling themselves free using a nearby door frame, they sprained their right shoulder. On 8/17/26, the employee sought medical treatment resulting in restricted duty.

Field service technician was working on grease lines on 988H loader lift arm. The wrench slipped when the line broke causing the techs hand to strike the corner of their safety glasses and caused a laceration to the right side of the head near the eyebrow temple area.

On July 25, 2026, while bent over assisting a three-person crew lifting and positioning an approximately 200-lb silo spout, the employee experienced sharp lower-back pain. The employee was medically evaluated. MRI results were reviewed on September 11, 2026, at 3:00 PM, resulting in a work-related diagnosis and physician-issued restrictions, making the injury reportable.

Employee was moving an electrical cabinet on the forks of a telehandler. When setting down the cabinet, the cabinet slid, pinching left middle finger causing a laceration, resulting in restricted duty

An Equipment Mechanic was performing maintenance on a loader pin when an impact gun struck EE in the chest. The employee was evaluated following the incident and, on June 24, 2026, was re-evaluated by a medical professional. During the follow-up evaluation, prescription medication was provided to treat the work-related injury.