Foresight Energy Labor LLC safety activity
MSHA violations, accident reports and inspections across the current mine portfolio.
Safety activity
Protection from falls of roof, face and ribs.
Mach #1 Mine · 110314130 CFR 75.202(a) · Significant and substantial (S&S)
Violation — cited standard not reported
Mach #1 Mine · 1103141Roof control plan.
MC#1 Mine · 110318930 CFR 75.220(a)(1) · Significant and substantial (S&S) · $4,383.00 proposed penalty
Nonpermissible diesel-powered equipment; electrical system design and performance requirements.
Mach #1 Mine · 110314130 CFR 75.1910(f)
Spot Inspections
Mach #1 Mine · 1103141103(i) · 7.0 on-site hours reported
Water spray devices; capacity; water supply; minimum requirements.
Deer Run Mine · 110318230 CFR 75.1107-7(b) · Significant and substantial (S&S) · $3,184.00 proposed penalty
Accumulation of combustible materials.
Deer Run Mine · 110318230 CFR 75.400 · Significant and substantial (S&S) · $7,267.00 proposed penalty
Drill dust control at underground areas of underground mines.
Deer Run Mine · 110318230 CFR 72.630(b) · $151.00 proposed penalty
Accumulation of combustible materials.
MC#1 Mine · 110318930 CFR 75.400 · $2,312.00 proposed penalty
Mechanical equipment guards.
MC#1 Mine · 110318930 CFR 75.1722(a) · Significant and substantial (S&S) · $6,037.00 proposed penalty
Accumulation of combustible materials.
MC#1 Mine · 110318930 CFR 75.400 · $398.00 proposed penalty
Handtools (nonpowered)
MC#1 Mine · 1103189No dys awy frm wrk,no rstr act
Accident narrative
The IE was removing a 10-inch valve in the RO Plant and had removed several bolts. When the IE removed the 2nd to last bolt, the valve swiveled and pinched the IE's ring finger between the collar of the valve and the pipe
Spot Inspections
Deer Run Mine · 1103182103(i) · 6.0 on-site hours reported
Spot Inspections
MC#1 Mine · 1103189103(i) · 6.0 on-site hours reported
Other safeguards.
Deer Run Mine · 110318230 CFR 75.1403
Electric equipment; examination, testing and maintenance.
Deer Run Mine · 110318230 CFR 75.512 · $226.00 proposed penalty
Roof testing and scaling.
Deer Run Mine · 110318230 CFR 75.211(d)
Roof testing and scaling.
Deer Run Mine · 110318230 CFR 75.211(d) · $193.00 proposed penalty
Roof control plan.
Deer Run Mine · 110318230 CFR 75.220(a)(1)
Roof control plan.
Deer Run Mine · 110318230 CFR 75.220(a)(1)
Fall of roof or back
Mach #1 Mine · 1103141Accident only
Accident narrative
At approximately 1:55 am a roof fall occurred in xc 3 number 4 entry on District 6
Handling of materials
Mach #1 Mine · 1103141Days away from work only
Accident narrative
employee was working on a 3 inch dewatering pump. when attempting to remove the plastic priming bowl plug it broke loose and allowed the water, sludge and steam to spray on the employee. Covering EE's right arm and face. employee was taken to emergency room for treatment. 2nd degree burns
Non-Injury Accident Investigation
Mach #1 Mine · 110314117.5 on-site hours reported
Violation — cited standard not reported
Mach #1 Mine · 1103141Escapeways; bituminous and lignite mines.
Mach #1 Mine · 110314130 CFR 75.380(d)(7)(i) · Significant and substantial (S&S)
Sources and definitions
MSHA Violations (issue date), Accidents (accident date) and Inspections (begin date).
Violation titles use current CFR headings to identify the cited rule; they are not the inspector’s account of what happened.
Status is from the current MSHA Mines snapshot, not the selected reporting period. Closed records can retain their last reported controller/operator.
Counts describe published rows, including contractor records; accident records are not distinct incidents or numbers of people injured.
Zero means no matching records in the imported sources, not proof of no events. Historical coverage differs by source; absence before a source begins reporting is not a zero incident rate. Invalid or absent dates and records after the snapshot are excluded.
S&S means SIG_SUB=Y. Fatality records use DEGREE_INJURY_CD=01. Proposed penalties are not final assessed or paid amounts; missing dollar values are omitted.
Inspection hours are SUM_TOTAL_ON_SITE_HOURS attributed to the inspection start date, without supervisor/trainee hours. Missing hours are omitted; a started inspection may still be open.
Portfolio totals use current mine membership, including events before the current owner or operator's tenure.